203-22-26747-1

Series:	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Moisture Sensitivity Level (MSL):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers: 203-22-26747-1 Application Field and Working Principle

Circuit Breakers, also called circuit interrupters, are electrical safety devices that protect either a person connected to a power line, or a piece of equipment, from receiving too much power. They provide a way to quickly disrupt the power flow with a simple flip of a switch. When the power flow is disrupted, it causes an arc in the circuit breaker, which makes a sound that notifies people in the area that the power has been shut off.Circuit breakers come in a variety of types and sizes, and are often categorized according to their application field and their method of working. The particular breaker discussed in this article is the 203-22-26747-1, which is a single-pole thermal magnetic breaker. Single pole breakers are designed to work on one line, while thermal magnetic breakers are designed to respond to both heat and magnetic forces. These breakers are typically used in residential and commercial buildings, as well as some industrial sites. These breakers are typically used to protect cables or small electrical systems from damages caused by short circuits, overloads, and/or ground faults.The working principle behind the 203-22-26747-1 circuit breaker is that it contains two separate components: a thermal trip mechanism, and a magnetic trip mechanism. The thermal trip mechanism responds to heat, and will trip the circuit when the line temperature rises slightly above its normal level. The magnetic trip mechanism uses the amount of current that is passing through the circuit to detect when there is an overload or a short circuit. When an overload or short circuit is detected, the magnetic trip mechanism will cause the breaker to trip, and thus shut down the power to the cable or electrical system.The 203-22-26747-1 circuit breaker is designed to respond to both overheating and overloading of a circuit. The thermal component of the breaker will trip the circuit when the temperature of the current line goes slightly above the rated current. This ability to protect against both overloading and overheating is beneficial, as it can provide added protection to the system from potential damages.The 203-22-26747-1 breaker also has a unique feature that allows it to be reset once the overload or short circuit problem has been corrected. This means that the breaker does not need to be replaced each time it trips due to a problem, and that it can be reset without having to disconnect the circuit.Overall, the 203-22-26747-1 circuit breaker is an important safety device for residential and commercial buildings, as well as for industrial sites that need additional protection from potential overloading or overheating problems. This type of breaker is designed to respond to both heat and magnetic forces, and to provide protection for cables or small electrical systems from potential damages due to overloading or short circuits. In addition, the breaker can also be reset once the problem has been corrected, which provides added convenience and cost-savings.

The specific data is subject to PDF, and the above content is for reference