208477150002026

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DIN 41612 Backplane Connectors provide an effective and reliable solution for the interconnection of electrical and electronic systems. They are suitable for a range of applications such as automotive, industrial, and military, and have been used in industry for over 30 years.

The DIN 41612 Backplane Connectors are a section of the family of connectors established by Deutsches Institut für Normung, an independent German technical and standards body. The dimensional standard used for these connectors is DIN 41612 and the connectors are designed and manufactured in accordance with these standards.

The most common application of the DIN 41612 Backplane Connector is in interconnecting printed circuit boards of electronic systems. The connector is mounted on a printed circuit board and consists of two to four columns of rectangular pins with a pitch of 7.62 millimeter [mm]. The connector pin array can have up to 100 contacts but typically contains 10 to 60 pins.

The objective of the DIN 41612 Backplane Connector is the interconnection of printed circuit boards which are placed side by side, with straight electrical interfaces. This design enables direct printed circuit board interconnection without the need for cables or wires, resulting in improved system density, cost and reliability. Additionally, the connector is designed to reduce crosstalk, noise, and radiation interference, as well as offer electrical protection.

The DIN 41612 Backplane Connector is made of two parts, a plug and a receptacle. The space between the pin columns in the plug and the receptacle is filled with an insulator, which helps reduce signal interference and reduces the chances of internal shorting. The plug and the receptacle consists of two metal sections, and the pins are held together by a plastic insulating material.

To connect the plug and the receptacle of the DIN 41612 Backplane Connector, a special tool known as the locknut is used. This tool is used to lock the two components together and a special key is needed to loosen the locknut. Once the two components are locked together, the pins align and make electrical contact.

The DIN 41612 Backplane Connector is designed to provide a reliable connection between two printed circuit boards. The reliable connection is achieved by the use of copper-plated and zinc-plated contacts which are designed to ensure good electrical contact. Additionally, the connector is designed to offer immunity to shock and vibration and is able to withstand temperatures ranging from -25°C to +85°C.

The DIN 41612 Backplane Connector is available in a variety of sizes and contact configurations to suit various applications. The connector is also available with a variety of protective covers, including EMC or RF protection, to provide additional protection from noise and electromagnetic interference. Overall, the DIN 41612 Backplane Connector is an effective and reliable solution for the interconnection of electrical and electronic systems.

The specific data is subject to PDF, and the above content is for reference