20S-CBSA-0.75X4.75X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	4.750" (120.65mm)
Width - Overall:	0.750" (19.05mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are devices used to reduce or eliminate the interference caused by radio frequency transmissions. The 20S-CBSA-0.75X4.75X0.2 is part of this group. It is most commonly used in applications such as telecommunications, automotive electronics, and medical equipment.This device is designed to reduce interference in a variety of frequencies. Its main purpose is to protect receivers and other sensitive equipment from harmful electromagnetic radiation. The 20S-CBSA-0.75X4.75X0.2 is well-suited for these applications because it can accurately attenuate radio frequency signals. This device is also designed to minimize signal loss, allowing for optimized signal reception and transmission. The 20S-CBSA-0.75X4.75X0.2 is constructed of multiple layers of shielding material. It has a base of Efield EMI gaskets, which isolate the RF shield from the other components in the system. This layer is then backed by a conductive fillet, typically a metal sheet, which is connected to a ground plane. The conductive fillet is then covered by a final layer of shielding material (typically an UN-flexible EMI gasket) to protect the other components and complete the signal filtering process. As with any RF shielding device, proper installation is crucial to ensure accurate attenuation of the radio frequency signals. The first step is to accurately measure the distance between the RF shield and the other components of the system. This will ensure that the RF shield is positioned correctly and that the amount of attenuation is sufficient for the application. The next step is to properly mount the RF shield onto the application’s circuit board. Proper mounting techniques are paramount to ensure the RF shielding device is effectively grounded and that the other components in the system are protected from interference.The 20S-CBSA-0.75X4.75X0.2 also has various features designed to maximize its effectiveness in various applications. It includes a conductive conductive foam lining on the inside of the shield, which further reduce emissions. The RF shield also features a shielding enclosure, designed to further isolate the RF source from the other components in the system. This shielding enclosure effectively reduces signal loss, allowing for better signal reception and transmission.In summary, the 20S-CBSA-0.75X4.75X0.2 is an effective and durable shielding device designed to protect receivers and other sensitive equipment from harmful electromagnetic radiation. Its base layer is constructed of Efield EMI gaskets and is backed by a metal sheet that is connected to a ground plane. This device is also designed to minimize signal loss, allowing for optimized signal reception and transmission. When properly installed, the 20S-CBSA-0.75X4.75X0.2 can effectively reduce or eliminate the interference caused by radio frequency transmissions, making it well-suited for a variety of applications.

The specific data is subject to PDF, and the above content is for reference