20S-CBSA-1.0X1.0X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	1.000" (25.40mm)
Width - Overall:	1.000" (25.40mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p><strong>RF Shields - 20S-CBSA-1.0X1.0X0.2 application field and working principle</strong></p><p>RF (Radio Frequency) shields are vital components in the engineering of any RF or radio-based product. The 20S-CBSA-1.0X1.0X0.2 RF shield is a durable and affordable shielding option for many different applications, and it is important to understand its field of use and the principles of its functioning.</p><p>The 20S-CBSA-1.0X1.0X0.2 Shield is an ultra-high frequency (UHF) shield guide. It is designed for use in the frequency range of up to 300MHz, and it is particularly suited for shielding UHF radio frequencies within that range. This type of RF shield is constructed from a light weight aluminum material, which is resistant to corrosion and weathering. The shield guide features an internal reflector and a directivity of up to 24 dBi.</p><p>This RF shield can be used in a variety of applications, ranging from basic radio transmission shielding to more complex and precision shielding for radio communication applications. The shields can also be used for attenuation of radio reflection and transmission. For example, the shield can be installed inside an enclosure, such as a laboratory or manufacturing facility, to minimize the possibility of signals leaking from the enclosure and interfering with other signals.</p><p>The 20S-CBSA-1.0X1.0X0.2 RF shield is also often used in RFI (Radio Frequency Interference) testing and shielding. It is designed to be installed directly onto a circuit board, in order to intercept and block unwanted signals without disrupting the board\'s performance. As the shield is extremely light and thin, it can easily be installed without significantly increasing the weight of the overall circuit design. Additionally, the shield has been designed to be especially effective at blocking the most powerful frequencies in the UHF range.</p><p>The 20S-CBSA-1.0X1.0X0.2 Shield Guide consists of a waveguide and a dielectric shield which function together to effectively block out radio frequency signals. The waveguide is made up of a hollow tube with a series of holes along its length. These holes serve to create a waveguide effect which creates a directional field in which the wave is forced to constantly travel along the shield, avoiding interference from other signals. The dielectric shield works alongside the waveguide to create an impermeable barrier against RF signals. The shield is made up of a specially designed material which is able to absorb energy from incoming signals without conducting it further. This type of combination makes the shielding much more efficient than a single waveguide or dielectric shield in isolation.</p><p>The 20S-CBSA-1.0X1.0X0.2 RF shield is a highly effective shielding solution for many different applications including RFI testing and shielding, radio transmission and reflection attenuation, and radio-based communication. It is designed to offer the highest levels of shielding efficiency in the UHF range, and is constructed from light-weight aluminum material which is incredibly resistant to wear and corrosion.</p>

The specific data is subject to PDF, and the above content is for reference