20S-CBSA-1.0X3.25X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	3.250" (82.55mm)
Width - Overall:	1.000" (25.40mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF ShieldsRF shields are an essential technology in various applications such as communications, medical, and automotive applications. RF shields are basically electrical enclosures that are used to reduce the amount of electromagnetic fields (EMF) present inside the device. They are used to provide shielding from the interference or noise that is generated by radio frequency (RF) or electrical signals coming from external sources.The 20S-CBSA-1.0X3.25X0.2 is one of the most common RF shield configurations used in various applications. This type of RF shield has three layers; the innermost layer is a curved or built-in RF absorber; the middle layer is an effective RF absorber; and the outermost layer is an electroplated metal shield. The electroplating process helps improve the performance of the shield by providing a greater degree of contact between the layers and the external environment.In terms of its application field, the 20S-CBSA-1.0X3.25X0.2 RF shield is mainly used in communication applications. It can also be used in automotive applications to reduce the amount of interference caused by the engine, vehicle electronics, and other sources of interference. In addition, this RF shield can also be used in medical applications to reduce the transmission and reception of radiation between electronic devices.In terms of working principle, the 20S-CBSA-1.0X3.25X0.2 RF shield works by trapping the incoming electromagnetic signal and dissipating it in the form of heat or electrical current. The inner layer of the shield is designed to absorb the incoming signal and the middle layer is designed to contain it. The electroplating process is used to prevent the external environment from entering the device. The effectiveness of the shield is determined by the degree of its contact with the external environment.The 20S-CBSA-1.0X3.25X0.2 RF shield also has a number of advantages. For example, it provides a higher degree of protection than other types of shields and its electroplating process also ensures better contact between the shield and the external environment, thus providing better protection. In addition, the installation of this shield does not require a high level of expertise.In conclusion, the 20S-CBSA-1.0X3.25X0.2 RF shield can be used in a variety of applications such as communications, medical, and automotive applications. This type of RF shield has three layers, with the innermost layer being a curved or built-in RF absorber, the middle layer being an effective RF absorber, and the outermost layer being an electroplated metal shield. It works by trapping the incoming electromagnetic signal and dissipating it in the form of heat or electrical current and provides a higher degree of protection than other types of shields. It is relatively easy to install and does not require a high level of expertise.

The specific data is subject to PDF, and the above content is for reference