Allicdata Part #: | 20S-CBSA-1.5X5.75X0.2-ND |
Manufacturer Part#: |
20S-CBSA-1.5X5.75X0.2 |
Price: | $ 17.05 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20S SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 1.500" (38.10mm) X 5.750... |
DataSheet: | 20S-CBSA-1.5X5.75X0.2 Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 15.50120 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 5.750" (146.05mm) |
Width - Overall: | 1.500" (38.10mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Shields are components used to reduce the signal propagation of electromagnetic waves. Commonly used in radiofrequency (RF) applications, these shields help create a barrier between the antenna and the transmitter or receiver they are connected to. The 20S-CBSA-1.5X5.75X0.2, for example, is an RF shield designed for use in multi-pole RF applications.
There are a variety of methods used by manufacturers to construct RF shields. One popular method is to form thin copper slabs between two plastic layers. These thin copper layers are then sandwiched together to form an RF shield with a specific cross-sectional area. The 20S-CBSA-1.5X5.75X0.2, for example, is built with two slabs, each measuring 1.5x5.75x0.2 inches.
The purpose of the 20S-CBSA-1.5X5.75X0.2 is to reduce the signal propagation of electromagnetic waves. In multi-pole RF applications, these shields help create a barrier between the antenna and the transmitter or receiver they are connected to. This ensures the signal propagates only in the desired direction, and doesn’t scatter in unintended directions. By forming a thin copper slab between two plastic layers, manufacturers can also reduce the amount of interference and EMI generated by the equipment.
In addition to improving performance, another advantage of using the 20S-CBSA-1.5X5.75X0.2 is that it reduces costs. When compared to some other RF shielding components, the 20S-CBSA-1.5X5.75X0.2 is less expensive to produce and less bulky. This makes it ideal for use in small and cost-sensitive applications.
The 20S-CBSA-1.5X5.75X0.2 is made of three layers: an outer layer of plastic, an inner layer of copper, and an optional third layer of plastic. The plastic outer layer provides a robust, non-reactive layer that helps to prevent corrosion and damage from environmental elements. The inner layer of copper prevents electromagnetic interference from entering or exiting the shield. The optional third layer of plastic helps to reduce the size of the shield, making it ideal for small or cost-sensitive applications. The layers are then bonded together using a special adhesive to create the desired diameter.
The 20S-CBSA-1.5X5.75X0.2 can be used in a variety of multi-pole RF applications, such as in audio and video equipment, GPS or WiFi receivers, and wireless sensors. It is also used in broadcast applications, where it reduces the amount of interference that can be generated by the transmitter and receiver. The 20S-CBSA-1.5X5.75X0.2 is a very effective and low-cost RF shield component, making it ideal for a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...