20S-CBSA-2.5X4.5X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	4.500" (114.30mm)
Width - Overall:	2.500" (63.50mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields - 20S-CBSA-2.5X4.5X0.2 Application Field and Working Principle

Radio frequency (RF) shields are a type of passive electronic component that helps protect other components within an electronic system from RF interference. While there are many types of RF shields, the 20S-CBSA-2.5X4.5X0.2 is a popular type with a wide range of applications. This article will discuss the application field of the 20S-CBSA-2.5X4.5X0.2 and the working principle behind it.The 20S-CBSA-2.5X4.5X0.2 is a type of RF shield that is specifically designed to be used in high-frequency applications. This type of RF shield is ideal for applications such as microwave components, radar and satellite communications, and wireless and cellular networks. It can also be used in other high-frequency applications such as television reception and antenna systems. Its purpose is to protect sensitive components from any harmful interference that may be caused by the high-frequency signals. The 20S-CBSA-2.5X4.5X0.2 has two main components: a conductive shield and a dielectric material. The conductive shield is made of copper or steel, and its purpose is to block any incoming interfering signals. It does this by creating an electromagnetic shield that redirects or dissipates the incoming signal, thus protecting the sensitive components from harm. The dielectric material, which can be made of silicone rubber or other types of polymers, is then used to insulate the shield from the system.The working principle behind the 20S-CBSA-2.5X4.5X0.2 is simple. It works by creating a Faraday cage and deflecting any incoming electromagnetic interference. This is made possible by the combination of the conductive shield and the dielectric material. The outside of the RF shield is encased in the conductive shield, while the component to be protected is insulated by the dielectric material. This creates a Faraday cage, which deflects any incoming RF interference and is effective at shielding the components from the interference. In addition to deflecting RF interference, the 20S-CBSA-2.5X4.5X0.2 is also designed to minimize radiation leakage. This is done by creating a low-resistance path for the electrical current outside the RF shield. This helps to reduce radiation leakage and ensures that the components are well protected. Overall, the 20S-CBSA-2.5X4.5X0.2 is an effective RF shield that is well suited for high-frequency applications. It is made of copper or steel, which provides a Faraday cage to deflect any incoming electromagnetic interference, while also minimizing radiation leakage. With its combination of features, the 20S-CBSA-2.5X4.X0.2 is the perfect choice for applications where high levels of protection are needed.

The specific data is subject to PDF, and the above content is for reference