20S-CBSA-2.5X5.0X0.2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields, also known as Radio Frequency Shields, are designed to protect people and equipment from harmful RF radiation. The 20S-CBSA-2.5X5.0X0.2 is an RF Shield specifically designed to protect devices from high frequencies in the VHF and UHF ranges. This shield is made of a layer of laminated copper mesh and can block out up to 97% of RF energy.

The 20S-CBSA-2.5X5.0X0.2 is primarily used in applications such as cell phone base stations, radio and television transmission towers, and Wi-Fi routers, to provide an overall reduction in RF radiation. It is also used in other applications such as medical, RFID, GPS, and testing equipment, where an effective barrier to RF radiation is required.

The 20S-CBSA-2.5X5.0X0.2 RF Shield works on the principle of attenuation. RF waves are made up of electromagnetic fields which cause energy to radiate out from the source. When a material is placed between the source and the receiver (such as the 20S-CBSA-2.5X5.0X0.2 shield), some of the energy is absorbed by the material, reducing the amount of energy that is received and thus reducing the electromagnetic field. This is known as attenuation.

The 20S-CBSA-2.5X5.0X0.2 RF Shield is an effective way to reduce the impact of RF radiation on people and equipment. The shield can be mounted in a variety of ways, depending on the application. It can be permanently mounted using screws or adhesive, or it can be temporarily mounted using clips or pins. It is important to make sure that the mounting method is secure and that the shield will not come loose or become damaged during use.

The 20S-CBSA-2.5X5.0X0.2 RF Shield is a versatile and effective solution for reducing the impact of RF radiation. Its laminated copper mesh has been specifically designed to provide an effective barrier against high frequencies in the VHF and UHF ranges. The shield can be permanently or temporarily mounted in a variety of ways, depending on the application, and can provide up to 97% attenuation of incoming RF waves.

The specific data is subject to PDF, and the above content is for reference