Allicdata Part #: | 20S-CBSA-3.0X5.25X0.2-ND |
Manufacturer Part#: |
20S-CBSA-3.0X5.25X0.2 |
Price: | $ 18.19 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20S SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 3.000" (76.20mm) X 5.250... |
DataSheet: | 20S-CBSA-3.0X5.25X0.2 Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 16.53840 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 5.250" (133.35mm) |
Width - Overall: | 3.000" (76.20mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields are designed to prevent radio frequency (RF) interference from entering, or exiting, a device. RF shields have become increasingly important as technology advances and more wireless devices are used in all aspects of life. One such type of RF shield is the 20S-CBSA-3.0X5.25X0.2.
The 20S-CBSA-3.0X5.25X0.2 shield is a bandstop filter, also known as a notch filter. Bandstop filters can limit or exclude selected frequencies from a certain range. A bandstop filter is used to attenuate specific frequencies from entering or leaving a device or circuit.
The 20S-CBSA-3.0X5.25X0.2 is a very efficient RF shield used to protect a device from RF interference in the frequency range of 8-1000 MHz. It is also an excellent choice for low RF leakage from a device operating in this frequency range. The shield is comprised of two distinct components, an inductor and a capacitor.
The inductor in a 20S-CBSA-3.0X5.25X0.2 RF shield is designed to create an inductive reactance at the resonance frequency of the shield. This reactance limits the current that can pass through the shield. The capacitor component in the shield acts like an open switch, removing the current that passes through the inductor part of the shield. This results in a high impedance between the two components which blocks the RF signal.
The 20S-CBSA-3.0X5.25X0.2 is used in a variety of applications including wireless and telecom systems, satellite and broadcast television, and medical equipment. This type of shield is also used in devices that require enhanced signal reception such as cell phones, antennas, and computer networks.
In order to properly install the 20S-CBSA-3.0X5.25X0.2 shield, manufacturers must first consider the inductance and capacitance parameters to ensure optimal performance. This includes understanding the resonance frequency of the shield as well as the performance of the inductor and capacitor components. Once these parameters are identified, proper installation techniques must be employed to ensure the proper functioning of the shield.
The 20S-CBSA-3.0X5.25X0.2 is a highly efficient RF shield that offers superior protection from RF interference. This type of shield is used in applications ranging from wireless and telecom systems, to medical devices and computer networks. It is comprised of an inductor and capacitor which form a high impedance path between the two components when in use, effectively blocking any RF signals. Careful consideration of the inductance and capacitance parameters must be made to ensure optimal performance when the shield is used.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...