Allicdata Part #: | 20S-CBSA-4.25X5.25X0.2-ND |
Manufacturer Part#: |
20S-CBSA-4.25X5.25X0.2 |
Price: | $ 19.36 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20S SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 4.250" (107.95mm) X 5.25... |
DataSheet: | 20S-CBSA-4.25X5.25X0.2 Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 17.59910 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 5.250" (133.35mm) |
Width - Overall: | 4.250" (107.95mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields are protective devices that are used to block or reduce Electromagnetic(EM) interference. They are made of either a conductive or metalized plastic material that is designed in such a way that it can effectively block or absorb radio frequency (RF) radiation. RF shields come in a variety of shapes and sizes, ranging from flat shields to those shaped like cones or tubes that are designed to control the propagation of EM waves.The 20S-CBSA-4.25X5.25X0.2 is a type of RF shield which is used to block or reduce EM interference from entering or leaving an electronic system. This type of shield is made of a conductive material such as copper or aluminum, which is then coated with a layer of dielectric or insulation to keep the EM waves from entering the system. The shape of the shield is designed in such a way so that it can effectively block or absorb RF radiation.When using this type of RF shield, it is important to ensure that it is securely mounted in place as any openings or gaps can allow EM waves to enter or escape. Additionally, the shield should be installed in a way that it will not be subject to any external forces, such as wind or motion. It should also be placed at a sufficient distance away from any nearby objects such as walls or other electronic equipment.The working principle of the 20S-CBSA-4.25X5.25X0.2 RF shield is based around the concept of impedance mismatch. This means that the difference between the wave impedance of the EM signal and the shield\'s impedance is not equal. When there is an impedance mismatch, the EM signal is reflected and absorbed by the RF shield instead of passing through it. This effectively blocks the EM signal from entering the system and will also reduce any EM radiation that could be escaping from the system.The 20S-CBSA-4.25X5.25X0.2 RF shield can be used in many different situations, such as in medical and electronics systems that require protection from EM radiation. Additionally, it can be used in RF protected areas, where it is necessary to reduce or block EM radiation in a certain area. This type of shield can also be used to block RF radiation from entering a building or other sensitive equipment in order to protect people or other systems.Overall, the 20S-CBSA-4.25X5.25X0.2 RF shield is an effective way to reduce or block EM interference from entering or leaving electronic systems. By using an impedance mismatch, the EM radiation is reflected or absorbed by the shield instead of traveling through it, thereby protecting both the system and the surrounding environment. This type of shield is a great option for a variety of applications and is an important part of any electrical or electronic system.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...