Allicdata Part #: | 20S-CBSA-5.0X5.0X0.2-ND |
Manufacturer Part#: |
20S-CBSA-5.0X5.0X0.2 |
Price: | $ 18.90 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20S SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 5.000" (127.00mm) X 5.00... |
DataSheet: | 20S-CBSA-5.0X5.0X0.2 Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 17.17950 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 5.000" (127.00mm) |
Width - Overall: | 5.000" (127.00mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Wireless radio shielding techniques are becoming increasingly important for protecting radiofrequency (RF) signals from interference and disruption. One of the most common methods used to achieve this is the use of RF shields, such as the 20S-CBSA-5.0X5.0X0.2 shield. This article looks at the application and working principles of the 20S-CBSA-5.0X5.0X0.2 RF shield.
The RF shield is a grounded metal enclosure designed to prevent unwanted external signals from entering or exiting a protected area, while allowing desired signals to pass. It is typically composed of an outer metal shield and an inner dielectric material used to form an electrostatic barrier. This shield is used to protect sensitive electronics from RF interference, as well as to provide protection for personnel from RF radiation.
The 20S-CBSA-5.0X5.0X0.2 shield is a single-layer, flat-plate metal shield designed to provide coverage for a wide range of frequencies, from 100 MHz to 30 GHz. It is designed to be installed over a grounded block or chassis, providing a low-generating electrostatic barrier that prevents unwanted signals from entering a protected area. The shield is also designed to be flexible, allowing for easy installation and long-term reliability.
The working principle of the 20S-CBSA-5.0X5.0X0.2 shield involves three main components: a primary shield, a secondary shield, and a third-party shield. The primary shield is typically made of metal, such as aluminum or steel, and serves as the main barrier for blocking unwanted radio signals. The secondary shield is typically a thin film shield, such as Kapton, Mylar, or PET, that provides additional isolation from external signals. Lastly, the third-party shield is typically a mesh or grid material designed to reduce the frequency losses in the shield systems.
The 20S-CBSA-5.0X5.0X0.2 shield is primarily used in automotive, aerospace, and telecom applications. This shield is typically installed in shielded enclosures in order to prevent interference from entering and exiting sensitive electronics. It is also used to reduce the amount of RF radiation emitted from sensitive equipment, protecting personnel from possible health risks.
In conclusion, the 20S-CBSA-5.0X5.0X0.2 shield is a single-layer, flat-plate metal shield designed to provide broadband coverage from 100 MHz to 30 GHz. It is used to protect sensitive electronics from interference and protect personnel from potential RF radiation risks. The shield functions by utilizing a primary shield, a secondary shield, and a third-party shield to enhance the electrostatic barrier, allowing only desired signals to pass while blocking out all other signals.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...