Allicdata Part #: | 20S-CBSFP-0.75X1.25-ND |
Manufacturer Part#: |
20S-CBSFP-0.75X1.25 |
Price: | $ 4.41 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20S-CBSFP-0.75X1.25--20S208--CIR |
More Detail: | RF Shield Shield, 2-Piece 0.750" (19.05mm) X 1.250... |
DataSheet: | 20S-CBSFP-0.75X1.25 Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 4.00932 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 1.250" (31.75mm) |
Width - Overall: | 0.750" (19.05mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The 20S-CBSFP-0.75X1.25 is a type of RF shield. It is commonly used in applications that require radio frequency shielding. In applications where radio frequencies are present, it is important to reduce the radio frequency interference. The 20S-CBSFP-0.75X1.25 RF shield serves this exact purpose.
This RF shield works by blocking or attenuating the radio frequency signals. It is composed of several layers that are each designed to absorb or deflect the incoming signal. This can be done by either absorbing the energy of the signal before it reaches the inside of a device, or by reflecting it away in order to reduce its effect. The layers are arranged in such a way that they combine to make the shield effective.
The 20S-CBSFP-0.75X1.25 shield is most commonly used in some of the following applications:
Wireless communication systems – these are communication systems that involve the transmission of radio signals in order to communicate between devices. The 20S-CBSFP-0.75X1.25 RF shield helps to reduce the interference caused by the radio signals and ensure that the communication is not disrupted.
Cellular networks – cellular networks involve the transmission of radio signals between base stations and mobile phones. As these radio signals travel through the air, they can cause interference to other devices. The 20S-CBSFP-0.75X1.25 RF shield helps to reduce this interference and ensure that the network remains stable.
Industrial electronics – in factories, many various equipment is powered by electricity. This equipment typically emits a lot of radio frequency interference, which can disrupt the functioning of other sensitive electronic devices. The 20S-CBSFP-0.75X1.25 RF shield is used to reduce the amount of interference that these devices cause, and ensure that the machines can operate reliably.
Imaging and medical equipment – medical equipment often use sensitive electronic components that can be easily disrupted by radio frequency interference. The 20S-CBSFP-0.75X1.25 RF shield helps to reduce the amount of interference that these devices experience and ensure that their performance remains consistently reliable.
The 20S-CBSFP-0.75X1.25 RF shield is composed of multiple layers. The first layer is an absorbing screen, which is designed to absorb the radio frequency energy. The second layer is a reflective surface, which is designed to reflect the signal away. Finally, the third layer is a combination of the two, which is designed to combine the absorption and reflection of the radio frequency energy.
The absorbing screen works by absorbing the energy of the radio frequency signals that pass through it. This allows the signal to be blocked before it reaches the device being protected. On the other hand, the reflective surface works by reflecting the signal away from the device, which reduces the amount of interference that it receives. The third layer combines these two components to make the shield even more effective.
The 20S-CBSFP-0.75X1.25 RF shield is designed to be used in applications where high levels of interference are present. It is important to note that this type of shield is not suitable for applications where there are very low levels of interference, as it may not provide the required amount of protection. It is important to assess the level of interference present in the environment before choosing which type of RF shield to use.
Overall, the 20S-CBSFP-0.75X1.25 RF shield is a great option for applications that require radio frequency shielding. It is composed of multiple layers that are designed to absorb and reflect the incoming RF signal, ensuring that the device being protected receives a minimal amount of interference. Additionally, its compact size helps to reduce its overall size and cost, making it a great option for many different applications.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...