Allicdata Part #: | 21-CBSA-2.5X3.0X0.225-ND |
Manufacturer Part#: |
21-CBSA-2.5X3.0X0.225 |
Price: | $ 13.76 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 21 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 2.500" (63.50mm) X 3.000... |
DataSheet: | 21-CBSA-2.5X3.0X0.225 Datasheet/PDF |
Quantity: | 1000 |
24 +: | $ 12.50580 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.225" (5.72mm) |
Length - Overall: | 3.000" (76.20mm) |
Width - Overall: | 2.500" (63.50mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount, Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to RF Shields
RF shields are essential components of electronics and are used to block out, control or reduce Radio Frequency (RF) signal interference. The shields are made of metal enclosure that are designed to contain RF signals within the enclosure by limiting the amount of external RF signal from leaking. The metal enclosure can also block external RF signals. The interior walls of this type of shield also act as reflectors and thus can conserve or prevent escaping radiation from the product inside.
In addition to shielding RF signals, these shields also provide electrical insulation, preventing potential arc-over and spark-overs between points.
21-CBSA-2.5X3.0X0.225 Application Field and Working Principle
The 21-CBSA-2.5X3.0X0.225 shield is one of the most popular RF shield on the market, as it is designed to be used in a variety of applications and it offers superior performance. It has a rectangular shape with a two-pointed mounting structure. The mounting structure is designed to provide secure mounting of the shield in systems and enclosures, thus preventing any RF leakage. The mounting of this shield is designed in such a way that it allows for adjustments to be made in order to fit the application.
This RF shield works by forming a network of signal absorbing walls that block out and reduce any RF interference. The interior walls of the shield are made up of a combination of high conductivity metal and plastic materials, allowing for a uniform electrical conductivity. Additionally, the walls also act as electrical insulators, preventing leakage of RF signals from within the shield.
The shield is also designed to be resistant to electromagnetic and electrostatic interference, as it is covered with an aluminum mesh that forms a Faraday cage, protecting the components inside from any external signals. Furthermore, the interior walls of the shield are lined with a special coating that helps to reduce any reflections of RF signals.
The shield is also designed with a gasket that is designed to increase the efficiency of the shield, as it prevents any RF signals from entering or exiting. The gasket is also designed to provide a tight electrical connection between the shield and the cover, eliminating any potential for air and water ingress.
Overall, the 21-CBSA-2.5X3.0X0.225 shield is an efficient means of shielding RF signals and components from interference and damage. It is highly effective at blocking out and reducing RF signals, as well as providing a protective layer against external signals. Additionally, it provides a high level of electrical insulation that prevents arcing and spark-overs. Therefore, it is an ideal choice for any application that requires RF shielding.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...