21-CBSFSV-2.0X2.0X0.225

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.225" (5.72mm)
Length - Overall:	2.000" (50.80mm)
Width - Overall:	2.000" (50.80mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

21-CBSFSV-2.0X2.0X0.225 RF Shields

RF shields are primarily used to control electromagnetic interference (EMI) between two circuits. The shields are also useful in controlling Electromagnetic Interference (EMI) into a single circuit, absorb spurious signals, and minimize interference or external influences on signals.The 21-CBSFSV-2.0X2.0X0.225 is a type of RF shield that provides very low RF Shielding Efficiency (RSE). The 2.0X2.0X0.225 RF shields are made with a special coating, which is capable of handling high RF frequencies. The shielding is made up of a thin conductive base which is then screened by a cladding of carbon, copper, or aluminum that provides an outstanding shielding efficiency.The 21-CBSFSV-2.0X2.0X0.225 RF shields are made from materials that have a very low dielectric loss tangent and are capable of shielding a wide range of radio frequencies. This particular type of RF shield is suitable for applications in the RF frequency range from 5 kHz up to 30 GHz, depending on the specific application needs.The 21-CBSFSV-2.0X2.0X0.225 RF shields are typically used in applications where the RF frequency is required to be confined to the local area. The shield is ideal for applications where a precise RF balancing is needed, such as antenna systems, audio amplifiers, communications systems, computer systems, and medical devices.The 21-CBSFSV-2.0X2.0X0.225 RF shields are designed to minimize interference between circuits where radiation may occur. These RF shields are also used to block interference from external sources. They can be placed between a transmitting antenna and a receiving antenna to minimize the effect of out-of-band interference.The 21-CBSFSV-2.0X2.0X0.225 RF shields are typically integrated into devices that use antennas or transmitting/receiving systems. The shields are typically located between the antennas and the receiving equipment, and they provide an effective barrier to RF radiation. They are also used to reduce interference from nearby devices or systems.The 21-CBSFSV-2.0X2.0X0.225 RF shields are designed in such a way that they reduce the effect of out-of-band interference as well as minimize the volume of radiation transmitted. These shields are also designed to reduce the level of unwanted or off-band interference without sacrificing signal strength. The RF shields are also designed to provide a higher degree of shielding efficiency than other types of shielding material.In addition, the 21-CBSFSV-2.0X2.0X0.225 RF shields are also used in medical facilities where there are high levels of RF radiation. The shields are designed to protect both patients and medical personnel from radiation. The shields are also used in industrial processes to reduce the effects of the radiation on personnel and equipment.The 21-CBSFSV-2.0X2.0X0.225 RF shields are also used in residential and commercial applications, which involves the transmission of RF signals. The shields reduce the radiation from other devices such as Wi-Fi or cellular phones. The shields are also used in military and defense operations where there is a need for RF frequency protection.The working principle of 21-CBSFSV-2.0X2.0X0.225 RF shields is based on the concept of electromagnetic interference (EMI). The shields are designed to block and absorb the electromagnetic waves emitted from the object of interest. When these waves reach the shield material, they get reflected or absorbed, thereby reducing the overall radiation produced from the object. The shield material is designed to provide an effective barrier against RF radiation, allowing the transmitting signal to be properly received while preventing other signals from entering the circuit.The 21-CBSFSV-2.0X2.0X0.225 RF shields are an effective and reliable way to reduce radiation levels and protect personnel from radiation. The 21-CBSFSV-2.0X2.0X0.225 RF shield is suitable for applications that require extremely low RF Shielding Efficiency, as well as applications that are exposed to high levels of interference. This particular type of RF Shield is ideal for industrial, medical, and residential applications.

The specific data is subject to PDF, and the above content is for reference