210-13-964-41-001000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Sockets for ICs, transistors, and other components are used to hold and protect miniature electrical devices while providing connections to a circuit board or other device. There are varying sizes and styles of sockets available, depending on the type of device being connected. The 210-13-964-41-001000 socket is a special type of socket designed to connect a specific type of device.

The 210-13-964-41-001000 socket is designed for use with dual in-line package (DIP) integrated circuits. It is not suitable for other components, such as transistors or resistors. The socket is constructed from polyethylene, with an 8 pin configuration in a 1/2 inch package, and a water repellent design. Each contact pin is spring-loaded to ensure a secure connection.

The design of the 210-13-964-41-001000 socket allows for a high degree of contact area between the integrated circuit and the printed circuit board without blocking other connections. This allows for increased electrical stability and a better connection with other components. The design also prevents debris from accumulating on the contacts, which provides improved conductivity.

The 210-13-964-41-001000 socket is designed to fit the standard 0.019 inch square-shaped pins that are associated with DIP ICs. It is designed to accept all common 0.019 inch square-shaped pins, as well as those with a 0.031 inch size. The socket is also designed to work with both through-hole and surface-mount ICs.

The 210-13-964-41-001000 socket is typically used in applications where an IC needs to be directly connected to a printed circuit board, eliminating the need for soldering or using a socket adapter. It is especially useful for applications where the IC needs to be replaced often, such as device firmware or configuration settings. The socket is also beneficial in preventing electrical damage to the IC due to excessive heat during soldering.

The 210-13-964-41-001000 socket features an operating voltage range of ±10 volts maximum, a rated power of 32 volts, and an insulation resistance of at least 1000 MOhm. The contact resistance is rated at less than 2mOhm, and the dielectric strength between contacts is rated at 500 volts. The socket is designed to operate in temperatures ranging from -20 to 85 °C.

In conclusion, the 210-13-964-41-001000 socket is designed for use with DIP integrated circuits. It provides a secure connection and a high degree of contact area. The socket is beneficial for applications requiring frequent IC replacement, as well as for preventing electrical damage due to soldering. It offers an operating voltage of ±10 volts, a rated power of 32 volts, and an insulation resistance of at least 1000 MOhm. The dielectric strength is rated at 500 volts, and the socket is designed to operate in temperatures ranging from -20 to 85 °C.

The specific data is subject to PDF, and the above content is for reference