21148173

Series:	ECCOSORB®
Part Status:	Active
Type:	Absorbing Sheet
Shape:	Square
Length:	12.000" (304.80mm)
Width:	12.000" (304.80mm)
Thickness - Overall:	0.250" (6.35mm)
Operating Temperature:	--
Adhesive:	--
Material:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RFI and EMI - Shielding and Absorbing Materials is the electromagnetic wave interference and electromagnetic interference that occurs between two or more electrical systems. It is either conducted or radiated through the electromagnetic medium, which can cause harmful disturbances to electrical and electronic systems. This interference can have an adverse effect on signal quality, and thereby on system performance, ultimately leading to system malfunction. To effectively manage this issue, special shielding and absorbing materials are employed. 21148173 is a common application field and working principle of these materials.

21148173 Application Field

21148173 application field generally consists of the following categories: power and control cables, radio frequency and microwave transmitters, wireless antennas & towers, remote sensing systems, and radar systems. In each of these categories, the impact of interference and electromagnetic interference can be drastically reduced by using shielding materials to absorb and redirect the energy away from the device, or by using an absorbent material to dissipate the energy. In power and control cables, for example, shielding material can be used to protect against static interference while protective layers can be used to shield from dynamic interference. The IP (Ingress Protection) rating of the application is also important; IP52 indicates that a cable is shielded from power interference, and IP67 indicates a strong degree of protection. In the case of wireless antennas and towers, shielding material is used to reduce the effect of interference from wind, rain, elevation changes and other environmental variables.The application of shielding and protective materials in other categories may vary, depending on the nature of the device and the environment. This includes gaskets, shielding tape, RF absorbers, ground planes, and even structural shielding.

21148173 Working Principle

The working principle of 21148173 materials focuses on absorbing, deflecting, or re-redirecting electromagnetic waves away from the device. This is achieved through the use of different materials, such as metals, plastics, or polymers, all of which absorb, redirect, and deflect electromagnetic waves.One commonly used material is conductive metals, which are able to effectively absorb and deflect the energy away from the device, thus preventing interference and EMF. This is achieved through the properties of resistance and polarization. Plastics and polymers are also commonly used in shielding as they are able to re-direct the energy away from a device. The basic mechanism behind this is that plastic materials possess low dielectric constant, or dielectric absorption. This, in turn, allows the plastic to deflect the energy away from the device. By manipulating its dielectric constant, the plastic can be made to absorb a large portion of the EMF by dispersing it over the surface of the material.Finally, RF absorbers, ground planes, and structural shielding are also used in this application field. RF absorber materials absorb energy by dispersing it throughout the absorber. Ground planes are also used to shield from interference and act as a channel for effective communication. Lastly, structural shielding acts as a barrier that acts to reduce the energy incident upon a device from its surroundings.

Conclusion

In summary, 21148173 is an important application field and working principle for shielding and absorbing materials when it comes to reducing the effect of interference and electromagnetic interference. The working principle of these materials focuses on absorbing, deflecting, and re-directing the energy away from the device using various materials, such as metals, plastics, and polymers. Additionally, RF absorbers, ground planes, and structural shielding are also commonly used in this application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description