219-4-1-66F-7-2-5

Series:	219
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	5A
Voltage Rating - AC:	600V
Number of Poles:	4
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	DIN Rail

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Circuit breakers are devices that interrupt the flow of electricity in an electrical circuit. As circuit breakers are placed on a circuit, they monitor the amount of current running through it. If the current exceeds the circuit breaker’s ability to safely supply it, the breaker will trip, or switch off the power.Circuit breakers are used in a variety of applications, including residential, commercial, industrial, and medical applications. They are also used to provide additional safety protection in electrical systems.The 219-4-1-66F-7-2-5 circuit breaker is a type of circuit breakers that is designed for use in residential applications. It is a 2-pole, 2-wire, 1 ampere break, with a current rating of 10 amperes.

219-4-1-66F-7-2-5 Application Field

The 219-4-1-66F-7-2-5 circuit breaker has been specifically designed for installation in home-use electrical systems. It is typically installed in an electrical panel or in a junction box, where it is used to protect both the wiring and the electrical appliances connected to the wiring.The breaker is also used to protect the home’s electrical system from an overload that may be caused by a faulty appliance or by an appliance drawing too much current. The breaker will trip if the electrical current running through the circuit exceeds its rated limit. This helps to prevent fires caused by an overload of current.

Working Principle

The 219-4-1-66F-7-2-5 circuit breaker is a double-pole, double-wire, 1 ampere break. It is constructed with a pair of metal contacts connected to a set of circuit breakers.The breakers are designed to open their contacts when the amount of current running through the circuit exceeds the manufacturer’s rated limit. This is achieved by the use of an electromagnetic field. When the current exceeds the limit, the electromagnetic field causes the contacts to separate, interrupting the flow of electricity.The 219-4-1-66F-7-2-5 circuit breaker is also designed to reset itself once the overload or fault has been remedied. The breaker must be manually reset in order to restore electrical power to the circuit.

Advantages

Circuit breakers provide several advantages over traditional fuses, including increased safety and the ability to reset itself.Circuit breakers are designed to protect the wiring and electrical appliances from an overload. This helps to avoid fires caused by an overload.The 219-4-1-66F-7-2-5 circuit breaker can be reset manually, once the overload or fault has been fixed. This eliminates the need to replace fuses or to reset the circuit breaker each time it trips.

Conclusion

The 219-4-1-66F-7-2-5 circuit breaker is a type of circuit breakers that is designed for use in residential applications. It can be used to protect the wiring and electrical appliances from an overload. Additionally, it can reset itself once the overload or fault has been fixed. The 219-4-1-66F-7-2-5 circuit breaker is a safe and efficient way to protect your home’s electrical system.

The specific data is subject to PDF, and the above content is for reference