219-4-6388-179

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers: Model 219-4-6388-179

Circuit breakers are used to protect electrical circuits from damage due to overload or short circuit conditions. They are wired up in series with the circuit at the point where the circuit may experience excessive current. The breaker will trip at a predetermined current level, thereby disconnecting the power supply and protecting the circuit. As the total power requirements of any electrical system increase, it becomes necessary to increase the current carrying capacity of the breakers, hence the need for higher current ratings.

Model 219-4-6388-179 is a type of circuit breaker created by ABB Group, a global engineering firm. This model is rated to be applicable to currents of up to 500A. The breaker is suitable for installation on electrical systems operating at up to 480VAC or 125 VDC. It features a T-type operating handle with three positions: off, on, and trip. It also features thermal and magnetic release mechanisms for trip protection.

The purpose of the circuit breaker is to protect the connected circuit at the specified current level before the circuit can be overloaded or short-circuited. This is achieved by the breaker automatically tripping and disconnecting the power supply when the current reaches the set threshold. The trip mechanism provides both time-delay and instantaneous protection, and the trip settings can be adjusted to meet a variety of protection requirements. The breaker\'s T-type handle can be used to reset the breaker after the trip occurs.

The 219-4-6388-179 circuit breaker works on the principle of current differential protection. This protection principle works by calculating the difference in phase current between all three phases. If any two of the phase currents exceed the preset threshold, the breaker will trip. This provides protection against overloads, short circuits, and other power disturbances. This principle also allows for adjustable fault thresholds and response times, depending on the application.

The breaker also employs a thermal release mechanism, which is designed to trip the breaker during thermal overloads. Thermal overloads occur when the electrical current is too large for the breaker to handle, thus causing the breaker to overheat. The thermal release mechanism works by increasing the trip threshold as the temperature of the breaker increases, thereby tripping the breaker more quickly as the temperature reaches higher levels.

In addition to thermal protection, the breaker also features a magnetic release mechanism. This mechanism works by rapidly increasing the trip threshold upon detecting a short circuit. This is done to protect against any further damage to the circuit caused by the short circuit. The magnetic release mechanism is additionally designed to trip the breaker without the need for any operator intervention.

The 219-4-6388-179 circuit breaker can be used to protect many different kinds of electrical systems, including lighting, motors, pumps, and other large electrical appliances. It is ideal for applications where a high current rating and maximum protection against short circuits and overloads is required. The breaker is designed to be long-lasting and reliable, and thanks to its adjustable trip settings, can be tailored to many different kinds of applications.

The specific data is subject to PDF, and the above content is for reference