21L-CBSA-0.75X2.75X0.225

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.225" (5.72mm)
Length - Overall:	2.750" (69.85mm)
Width - Overall:	0.750" (19.05mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount, Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are a unique type of component used for radio frequency (RF) signal attenuation. This type of component is especially useful in applications where it is necessary to reduce the interference of incoming RF signals in order to preserve signal integrity. The 21L-CBSA-0.75X2.75X0.225 is a type of RF Shield that is specifically designed for reducing the environmental interference associated with wireless communication applications. This article will discuss the applications and working principles of the 21L-CBSA-0.75X2.75X0.225 RF Shield.The 21L-CBSA-0.75X2.75X0.225 RF Shield is most commonly used in wireless communication applications. The shield is used to block incoming RF signals, including electro-magnetic interference (EMI), from interfering with the operation of the device. The shield is designed to provide a reliable means of attenuating the incoming signal to ensure that the desired signal is maintained and the device can continue to communicate without interruption.The 21L-CBSA-0.75X2.75X0.225 shield utilizes a combination of physical dimensions and material properties to provide the desired shielding effectiveness. The dimensions of the shield are 0.75x2.75x0.225 inches, and it is composed of a highly conductive material, such as copper, that effectively dissipates incoming RF energy and prevents it from entering the protected area. In addition, the shield is designed to be air-tight, which allows it to block all incoming RF signals, regardless of their source.In addition to shielding, the 21L-CBSA-0.75X2.75X0.225 RF Shield can also be used to enhance signal reception. By utilizing the highly conductive material, the shield can also act as an antenna booster in certain environments. This can be especially useful in applications where external receivers, such as cell phones or wireless receivers, are located in close proximity.The 21L-CBSA-0.75X2.75X0.225 shield can also be used to reduce crosstalk between multiple receivers, as the shield can be installed in between two receivers to block interfering signals. This can be especially useful in cases where multiple receivers are located in the same area.Finally, the 21L-CBSA-0.75X2.75X0.225 shield can also be used to reduce the effects of temperature and humidity on the operation of a wireless communication system. The shield is designed to be resistant to corrosion, which helps to extend the life of the device and ensure its continued reliability.In summary, the 21L-CBSA-0.75X2.75X0.225 RF Shield is a useful and versatile component that can be used in a variety of wireless communication applications. It is designed to provide reliable signal attenuation and blockage of incoming interference. The shielding can also be used to enhance reception and reduce crosstalk in multiple receiver applications. Finally, the shield is resistant to corrosion and temperature and humidity, which helps to extend its lifespan.

The specific data is subject to PDF, and the above content is for reference