Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.225" (5.72mm)
Length - Overall:	4.500" (114.30mm)
Width - Overall:	3.750" (95.25mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount, Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of 21M-CBSA-3.75X4.5X0.225 RF Shields

The 21M-CBSA-3.75X4.5X0.225 RF shield is one of the most popular models on the market today. It is used to protect electronic devices from electromagnetic interference (EMI) or radio frequency (RF) interference. It is a type of electromagnetic shielding that is designed to enclose electronic equipment and reduce its interference with other electronics.The 21M-CBSA-3.75X4.5X0.225 RF shield is made from a conductive material, usually metal. Copper and aluminum are commonly used to make these shields. The material is then treated and shaped into the desired shape. Depending on the size and shape of the shield, the size and shape of the material also determine the amount of protection provided.The 21M-CBSA-3.75X4.5X0.225 RF shield is designed to reduce interference from external sources. It works by blocking RF signals from entering the protected area. Since RF waves travel in all directions, the shield must be placed in order to block all signals coming from possible sources of interference. This ensures that the device being protected does not accidentally pick up signals from nearby sources.The 21M-CBSA-3.75X4.5X0.225 RF shield has a variety of applications. It is used in a variety of areas, including telecommunications, military, and consumer electronics. It is also used in the automotive and medical industries. In addition to being used to protect electronic devices from interference, the 21M-CBSA-3.75X4.5X0.225 RF shield can also be used to reduce the spread of RF radiation.The 21M-CBSA-3.75X4.5X0.225 RF shield can be used in both residential and commercial settings. It is typically installed near computers, wireless access points, and other types of electronic equipment. It can also be used to reduce RF interference in industrial settings. It is important to note that the size and shape of the shield must be determined before it is used. Some shields are designed to fit certain types of equipment while others are not.When installing the 21M-CBSA-3.75X4.5X0.225 RF shield, it is important to follow the instructions provided. The shield should be secured in place and then the shielding material should be connected to the mounting hardware. The shielding material should be checked for continuity, and the connections should be tested for proper stability and strength. In addition, proper grounding should be ensured.The 21M-CBSA-3.75X4.5X0.225 RF shield is an effective means of preventing RF interference and reducing the spread of RF radiation. It is a type of shielding that has a range of applications and is designed to reduce interference from external sources. It is important to properly install the shield in order to ensure the best protection. Once the shield is in place, it is important to test the connections and ground the shield properly.

The specific data is subject to PDF, and the above content is for reference