2210-S211-P1T2-H121-10A

Series:	2210-S2
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Thermal Magnetic
Moisture Sensitivity Level (MSL):	--
Current Rating:	10A
Voltage Rating - AC:	277V
Voltage Rating - DC:	65V
Number of Poles:	1
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit BreakersCircuit Breakers, also known as circuit protection devices, are designed to protect electrical circuits from current overloads and short circuits. The 2210-S211-P1T2-H121-10A circuit breaker is no different. They are primarily used in industrial applications to protect infrastructure and/or equipment from damages due to a short circuit or overload.The 2210-S211-P1T2-H121-10A circuit breaker has a few core components. The Housing is the outermost casing which houses all the other components of the circuit breaker and also provides protection against dust, moisture, and physical damages. The Operating Mechanism is the core/main component of the circuit breaker, which is in charge of switching the circuit breaker between the “on” and “off” positions. This is usually done via a lever and is often spring loaded. The Contacts are pieces of metal which are connected to the power supply and equipment that are being protected. They are situated inside the circuit breaker and they make contact when the circuit breaker is switched to the “on” position. The Arc Chute is a critical component which enables the circuit breaker to disconnect the circuit in the event of an overload or short circuit. It does this by providing the arc with the path to ground, which extinguishes the arc.The Insulation is another important component of the circuit breaker, it is an insulating material which helps to isolate the circuit from the outer housing and other components inside the breaker. This is important for ensuring that the current does not travel through anything other than its intended path. It also shields against electric shocks and helps protect against undue exposure to electricity.The 2210-S211-P1T2-H121-10A circuit breaker also includes a Trip Unit. The Trip Unit is an important part of the circuit breaker. It is designed to detect if the current in the circuit is too high or if something is shorting the circuit. When either of these events occur, the trip unit sends a signal to open the circuit breaker and disconnect the power. This helps to protect the circuit from irreversible damages due to an excessive amount of electricity flowing through it.The 2210-S211-P1T2-H121-10A circuit breaker is primarily used in industrial applications. It is designed to protect industrial equipment such as motors, pumps, and generators from damages due to an overload or short circuit. This type of circuit breaker is also utilized in residential applications, where it can be used to protect home appliances and other electrical components from the danger of an electrical surge.The working principle behind the 2210-S211-P1T2-H121-10A circuit breaker is quite simple. When the circuit is at the “on” position, the contacts complete the circuit and allow electricity to flow. If the current in the circuit increases beyond the specified limit, or if something shorts the circuit, the trip unit will detect the problem and send a signal to open the contacts and break the circuit. The arc chute then allows the arc to travel to ground, extinguishing the arc and safely cutting off the flow of electricity.In conclusion, the 2210-S211-P1T2-H121-10A circuit breaker is an important component in electrical systems. It is designed to protect equipment from damages due to overloads or short circuits. It can be used in industrial and residential applications and is quite simple in its working principle and construction.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description