2210-T210-K0M1-H121-25A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are a type of electrical switch designed to protect electrical circuits from damage caused by excess current and short circuits. They operate automatically under abnormal circuit conditions and will shut off the current if it goes above a certain level. They are used in a wide array of electrical applications, ranging from home wiring to commercial and industrial power distribution. The 2210-T210-K0M1-H121-25A is a circuit breaker designed for use in class 1, Division 1 hazardous locations. It is ideal for use in applications such as oil and gas production, drilling rigs, and petrochemical plants.

The 2210-T210-K0M1-H121-25A is a type of circuit breaker commonly known as a thermal-magnetic breaker. This type of breaker combines the high current capabilities of a thermal magnetic device with the selectivity of a non-current limiting device. It is designed to detect an overload or a short circuit condition and automatically shut off the current flow. The breaker features a manual-on/auto-off switch for manual operation and has lockable "on" and "off" positions for added safety.

The 2210-T210-K0M1-H121-25A operates according to a thermal-magnetic design that uses both thermal and magnetic forces to detect an overload or short circuit condition. When the breaker is on, current passing through the breaker creates heat. As the temperature of the breaker reaches the thermal threshold, the device trips, or opens, the contacts and interrupts the circuit’s current flow. That same current also generates a magnetic force that acts on the contacts within the breaker. If the current exceeds a certain level, the contacts will open and the breaker will trip.

The 2210-T210-K0M1-H121-25A can also be used in DC applications. The breaker has an individual thermal and magnetic trip setting and can be set to trip either at the current of the circuit load or at a higher current level. The adjustable trip setting allows the breaker to be tailored to the needs of the specific application and ensures optimal protection of the circuit.

The 2210-T210-K0M1-H121-25A is an ideal choice for protection in hazardous location applications where a fault current exceeding the short-circuit rating of the system could present a safety hazard. The breaker is UL listed and CSA certified for class I, Division 1 hazardous location applications and is ideal for use in oil and gas wells, drilling rigs, petrochemical plants, and other applications requiring low-voltage protection.

In summary, the 2210-T210-K0M1-H121-25A circuit breaker is a thermal-magnetic breaker designed for use in hazardous location applications. It uses a combination of thermal and magnetic forces to detect an overload or short circuit condition and automatically shut off the current flow. The breaker is CSA certified for class I, Division 1 applications and is ideal for use in oil and gas production, drilling rigs, and petrochemical plants requiring low-voltage protection.

The specific data is subject to PDF, and the above content is for reference