2210-V-RC

DC Resistance (DCR):	26 mOhm Max
Height - Seated (Max):	0.550" (13.97mm)
Size / Dimension:	0.950" Dia (24.13mm)
Supplier Device Package:	--
Package / Case:	Radial
Mounting Type:	Through Hole
Inductance Frequency - Test:	1kHz
Operating Temperature:	-55°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	2200
Shielding:	Shielded
Current - Saturation:	--
Current Rating:	6.4A
Tolerance:	±15%
Inductance:	56µH
Material - Core:	Iron Powder
Type:	Toroidal
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2210-V-RC Fixed Inductors Application Field and Working Principle

2210-V-RC is a type of fixed inductors used in circuit designs and is widely used in many electronic devices. In this article, we will look at the application field and working principle of 2210-V-RC fixed inductors.

Application Fields

The 2210-V-RC fixed inductors are widely used in a variety of applications where inductive reactance is needed. They are most commonly used in power supply units, RF circuits, audio circuits, automotive electronic control circuits, switched-mode power supplies, and telecom equipment.In a power supply unit, the inductor is used to filter high frequency noise and reduce ripple voltage. In RF circuits, they are used as a coil or filter component to increase the amount of power at a certain frequency. In audio circuits, they are used to reduce the amount of noise and feedback in the signal chain. In automotive electronic control circuits, the inductor is used to filter out high frequency noise, reduce EMI noise, and ensure signal integrity.In switched-mode power supplies, the inductors are used to store energy when the switch is turned off and release the energy when the switch is turned on. Finally, in telecom equipment, they are used to filter out noise, increase the transmission efficiency, and reduce interference.

Working Principle

The working principle of the 2210-V-RC fixed inductors is the same as that of any other inductors. It consists of an insulated wire or coil, which has an electric current running through it. When electric current passes through a coil it creates a magnetic field. This magnetic field induces a reverse current, known as the back EMF, which opposes the flow of the current through the coil. This phenomenon is known as Lenz\'s Law. The resulting voltage drop in the coil is what creates the inductance in the inductor.The size of the inductance is dependent upon the number of turns of the coil and the geometry of the coil. The higher the number of turns and the larger the geometry of the coil, the higher the inductance. As with any other component, the higher the inductance, the higher the self-resistance will be. The self-resistance of the coil will affect the performance of the inductor, therefore, it is important to choose a suitable inductor for the desired application.

Conclusion

In conclusion, the 2210-V-RC fixed inductors are widely used in a variety of applications where inductive reactance is needed. Their working principle is the same as any other inductor, where a magnetic field is induced by an electric current running through the coil. The size of the inductance is dependent upon the number of turns and geometry of the coil. With the right selection, these inductors can be used to filter high frequency noise, reduce EMI noise, increase the amount of power at a specific frequency, increase transmission efficiency, and reduce interference.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description