225-PRS18003-12

The 225-PRS18003-12 is an integrated circuit (IC) socket, which is designed to provide a secure connection between an IC and its supporting circuit board. It is a one-piece socket with an integrated metal shield that is in contact with the circuit board. The 225-PRS18003-12 is primarily used for ICs, transistors, and other integrated circuits, although it can also be used for other applications.The 225-PRS18003-12 socket is a non-conductive, open-air socket that is designed to provide secure and reliable connections between the I/O pins of the integrated circuit and the circuit board. The socket comes in two different sizes. It can accommodate either 1/4-inch ICs or 2/7-inch ICs. The pins are arranged in a single row on the socket and the body is designed to be as low profile as possible so that it will fit into any IC design.The 225-PRS18003-12 socket features a floating-pin design that ensures that the IC pins are properly aligned with the pads on the circuit board. The alignment is achieved by the use of a movable set of pins that are raised and lowered when the socket is installed. This allows for a secure and reliable connection between the IC and its supporting circuitry.The 225-PRS18003-12 socket is also designed to provide protection for the IC and its pin connections from electrostatic discharge (ESD) and other electrical hazards. The socket features an integrated metal shield that is in contact with the circuit board to provide protection against ESD. The socket also features a spring-loaded pin connector to securely engage with the IC pins and provide a good electrical contact.The 225-PRS18003-12 socket also has a built-in taper to allow for easier installation and removal from the circuit board. The taper allows for a smooth transition between the IC and the socket, which helps to reduce the risk of damage to the components. The socket also features keying slots that ensure the proper alignment of the IC pins with the circuit board.Overall, the 225-PRS18003-12 socket is an ideal solution for applications that require a cost-effective, reliable, and secure connection between an IC and its supporting circuitry. The socket features a low profile design, an integrated metal shield, a floating-pin design, and other features that make it an ideal solution for IC, transistor, and other integrated circuits.