2256-13K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are devices used in a wide variety of electronic applications, such as amplification, filtering, signal generation and voltage regulation. The 2256-13K is a popular type of fixed inductor that is used for a variety of applications due to its compact form factor and reliable performance.

The 2256-13K is a high-quality fixed inductor that has an inductance of 15μH and can handle up to 600mA at up to 85°C. It is typically used in a variety of common circuits, including single-ended and center-tapped rectifiers, low-dropout linear regulators, low pass filters, RF networks, and multi-sector regulators. It is also used in pulse signal conditioning applications, such as low-power transistors.

The 2256-13K is a monolithic component that consists of a copper coil and two ferrite cores that are housed in a plastic casing. The inductor is based on the ‘core-coil’ configuration and uses a permanent magnetic field generated by the ferrite cores to induce a voltage across the coil. The size of the ferrite cores determines the amount of inductance and current flow through the coil. Due to its small size and high efficiency, the 2256-13K can be used in a variety of electronic circuits and applications.

The 2256-13K employs a direct-current (DC) bias as opposed to an alternating-current (AC) bias which can cause interference in the frequency range used by the inductor. The DC bias often gives better results and allows the device to operate without any need for external components. The bias also helps the device run cooler, which can result in a greater overall efficiency than an AC-biased inductor.

The working principle of the 2256-13K can be understood by examining its structure. The core is made up of two ferrite pieces sandwiched together. Passing a current through the coil will generate a magnetic field which will be directed to the core. The magnetic field at the core will interact with the cores’ internal magnetic quality which will cause a current in the opposite direction to be induced in the coil.

The inductance of the 2256-13K is determined by the size of the core as well as the number of turns in the coil. The current rating is determined by the core material used and the size of the wire. The 2256-13K is capable of handling up to 600mA of current at 85°C, making it suitable for use in a variety of circuits.

The 2256-13K is a fixed inductor that is commonly used in a wide variety of applications. It is a compact device that has an inductance of 15μH and can handle up to 600mA at up to 85°C. The working principle of the 2256-13K relies on a permanent magnetic field which is generated by the ferrite cores to induce a voltage across the copper coil. It is typically used in a variety of circuits, including single-ended and center-tapped rectifiers, low-dropout linear regulators, low pass filters, RF networks, and multi-sector regulators. With its reliable performance and compact form factor, the 2256-13K is an ideal choice for fixed inductor applications.

The specific data is subject to PDF, and the above content is for reference