229-3-2REC4-27813-3

Circuit breakers are a common type of electrical switch designed to protect electrical wiring and signals from overloading. The 229-3-2REC4-27813-3 is a particular type of circuit breaker designed for use in environments where extremely high current needs to be passed through a circuit without incurring any damage. This type of circuit breaker has a variety of applications, ranging from use in data centers and power plants to industrial settings.

The 229-3-2REC4-27813-3 is a three-pole, two-wire circuit breaker with a rated operational voltage of 277VAC and a rated operating current of 400A. It is rated for operation in environments up to 65C, making it suitable for a wide range of electrical applications, including power distribution applications with high ambient temperatures. This type of circuit breaker can be mounted in an enclosure, either by itself or as part of a larger protective system, depending on the needs of the application.

The working principle of the 229-3-2REC4-27813-3 is based on an electro-mechanical switching mechanism. This type of circuit breaker is designed with three main components: the breaker contacts, the trip mechanism, and the overload sensing device. The breaker contacts are the two metal points of contact that control the flow of electricity. These contacts can either remain open or close, depending on the amount of current that is passing through the circuit. When the current exceeds the breaker’s rated current, the trip mechanism will activate, causing the circuit breaker to trip and disconnect the circuit.

The overload sensing device is connected to the trip mechanism. This device continuously monitors the current that is flowing through the circuit and will detect any overloads. Once an overload is detected, the trip mechanism will be activated, which will open the contacts and disconnect the circuit from the power source. This type of circuit breaker is designed to operate with a small amount of current leakage, meaning that there is little chance of an electrical fire due to an overload.

The 229-3-2REC4-27813-3 circuit breaker provides a reliable and cost-effective solution for a number of applications, such as power distribution, industrial motors, and data center applications. It is designed to protect wiring and signals from overloading, and its ratings make it suitable for use in a wide range of electrical systems. The three-pole, two-wire design coupled with the overload sensing device allow for a high degree of protection against current overloads, helping to protect the wiring and ensure the reliability of the system. Finally, its operation is based on an electro-mechanical switching mechanism, making it highly reliable and efficient.