229D-1-22663-12 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers are safety mechanisms used to prevent overcurrents, overloads and short circuits. They provide maximum current protection and reliable circuit control. The 229D-1-22663-12 circuit breaker is a trip-free circuit protection device designed to be used in high voltage applications. It is designed to protect electrical lines that carry high currents in residential, commercial and industrial installations.

The 229D-1-22663-12 circuit breaker operates by detecting when the current exceeds the rated limit. When this happens, the circuit breaker trips, causing the connected appliance or system to immediately shut down. This helps to protect the appliance, system and other components integrated within the circuit.

The 229D-1-22663-12 circuit breaker is specifically designed for high voltage applications. It is capable of operating with currents up to 6500 amps at 600 volts AC. It is constructed with epoxy encapsulation and conforms to the UL489 standards. The 229D-1-22663-12 circuit breaker is certified to CSA C22.2 No. 235 Category A.

To install the 229D-1-22663-12 circuit breaker, it must first be mounted in the circuit breaker enclosure. It should be connected to the bus bars or circuit breaker box using the appropriate screws or bolts. The current carrying capacity of the breaker must match the rating of the circuit in order for it to be properly connected. Upon installation, the breaker should be tested for proper operation.

When the 229D-1-22663-12 circuit breaker is operating, it allows a set amount of current to pass through the circuit. This current is monitored continuously by the breaker. If the current reaches the trip point, the breaker will ‘trip’, causing the circuit to disconnect. This will break the flow of electric current, thus protecting the connected appliance or system from any potential damage.

The 229D-1-22663-12 circuit breaker also includes a manual reset feature. This allows the circuit breaker to be reset manually at any time, if necessary. The breaker should always be reset after it has tripped, in order to restore and maintain the system back to a safe state of operation.

In summary, the 229D-1-22663-12 circuit breaker is a reliable, efficient, and safe solution for high voltage installations. It is designed to provide current protection and circuit control, and to help protect connected equipment from excessively high temperatures or voltage shortages. The breaker is certified and tested for safety and reliability, and is approved for use in residential, commercial, and industrial applications.

The specific data is subject to PDF, and the above content is for reference