24-CBSA-0.75X3.5X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	3.500" (88.90mm)
Width - Overall:	0.750" (19.05mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount, Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Radio Frequency (RF) shields are devices used to shield or protect electronic equipment from electromagnetic interference (EMI) caused by RF radiation. The 24-CBSA-0.75X3.5X0.2 RF shield is a popular shielding solution for many applications and is designed to filter electromagnetic radiation so that the electronic equipment operates optimally. In this article, we will discuss the application field and working principle of the 24-CBSA-0.75X3.5X0.2 RF shield.

Application Field

The 24-CBSA-0.75X3.5X0.2 RF shield is designed for use in medical imaging, communication systems, and industrial machinery applications. In medical imaging applications, the 24-CBSA-0.75X3.5X0.2 RF shield is used to reduce interference from other RF sources which could affect the accuracy of the images. This interference could come from sources within the hospital or even from external sources such as nearby cell towers. The 24-CBSA-0.75X3.5X0.2 RF shield is also used in communication systems. It is used to protect the system against interference from other RF sources such as cell phones or other devices. The shield can also be used to reduce the amount of RF radiation emitted from the system itself. In industrial machinery applications, the 24-CBSA-0.75X3.5X0.2 RF shield is used to protect the system from the effects of RF radiation. This radiation can cause damage to electronic components if it is not shielded properly. The 24-CBSA-0.75X3.5X0.2 RF shield is designed to reduce this effect and ensure the proper operation of the machinery.

Working Principle

The 24-CBSA-0.75X3.5X0.2 RF shield is designed to filter out external RF sources while allowing desired signals to pass through. The shield works by using layers of conducting material to reduce the strength of the RF signal reaching the protected equipment. Each layer absorbs energy from the incoming RF signal and dissipates it as heat. This reduces the strength of the signal and makes it harmless to the electronic equipment. The 24-CBSA-0.75X3.5X0.2 RF shield is designed with a series of metal layers which form an interconnected shield. Each layer reduces the amount of RF radiation which reaches the protected equipment. The layers of shielding are typically made from copper, aluminum, or other electrically conductive materials. The 24-CBSA-0.75X3.5X0.2 RF shield is designed to be installed in front of the equipment being protected. This allows the shield to absorb the energy from the incoming RF signal, before it reaches the sensitive electronic components.

Conclusion

The 24-CBSA-0.75X3.5X0.2 RF shield is an effective shielding solution for many applications. It is designed to reduce the effects of external RF signals on electronic equipment, while allowing desired signals to pass through unimpeded. The shield works by using layers of electrically conducting materials which absorb and dissipate energy from the RF signal. This reduces the strength of the signal and ensures that the equipment operates as intended.

The specific data is subject to PDF, and the above content is for reference