24-CBSA-1.25X1.5X0.25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF shields are circulation components in an RF circuit that serve to reduce interference and noise. It can be configured in a variety of ways depending on the application. In this article, we discuss the application field and working principle of the 24-CBSA-1.25x1.5x0.25 shield.

The 24-CBSA-1.25x1.5x0.25 shield is a flexible, often nearly rectangular-shaped, sheet metal shield used to reduce interference and noise. This type of shield can be used in both high and low power RF circuits. It is particularly well-suited for circuits where the size of the shield is an important factor, such as circuit board components in mobile phones or laptop computers.

The 24-CBSA-1.25x1.5x0.25 shield is typically constructed of an electrically conductive material such as copper or aluminum. It has a width of 1.25 inches (3.17 cm), a length of 1.5 inches (3.81 cm), and a thickness of 0.25 inches (0.635 cm). Like most shields, the 24-CBSA-1.25x1.5x0.25 shield is designed to be placed over the circuit components or wires that require shielding. The shield is then connected to ground through a resistor, capacitor, or short wire.

The working principle of the 24-CBSA-1.25x1.5x0.25 shield is simple. It acts as a barrier between the noise/interference sources and the circuit components that it shields. The shield absorbs most of the energy from the interference or noise source and reflects it away from the sensitive components. The shield also acts as an electrical ground for the sensitive components. This provides a low-impedance electrical contact between the shielded components and ground, preventing the interference or noise from entering the circuit.

The 24-CBSA-1.25x1.5x0.25 shield is widely used for its ease of installation, cost-effectiveness, and ability to reduce interference and noise in RF circuits. It is commonly used to protect circuit elements in mobile phones, laptop computers, and other electronic equipment. It is also widely used in radio and television broadcasting, satellite communications, and other applications that require shielded circuits.

In conclusion, the 24-CBSA-1.25x1.5x0.25 shield is a valuable tool for reducing interference and noise in RF circuits, due to its size, cost-effectiveness, and ease of installation. Its working principle is simple yet effective, allowing it to provide the necessary protection for sensitive electronic components in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference