24-CBSA-6.0X6.0X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	6.000" (152.40mm)
Width - Overall:	6.000" (152.40mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount, Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are electronic components that are used to protect equipment from unwanted electromagnetic interference, or EMI. They can range from very simple devices like ferrites, to large enclosure-type shielding solutions. Shields are designed to reduce or eliminate the transmission of EMI from a source to a receiver. The 24-CBSA-6.0X6.0X0.2 is an example of an RF Shield. It is a single-layer EMI shielding solution that is constructed primarily with aluminum-magnesium alloy (AluMag) and copper base material. Providing a conductor thickness of 0.2mm, the shield is designed to block EMI in the frequency range of 10MHz-3GHz, and is capable of providing up to 50dB of attenuation.The 24-CBSA-6.0X6.0X0.2 is used in a variety of applications, including in industrial and consumer electronics. Due to its small size, and the relatively low cost of its materials, it is often used in smaller enclosures, or as a single-layer shield for larger enclosures. Examples of its applications include RF signal and receiver shields in radio systems, server cabinets, and communications equipment. It may also be used in automotive, medical, military, or aerospace applications, just to name a few.The working principle of the 24-CBSA-6.0X6.0X0.2 RF Shield is relatively simple. When a signal is introduced to the shield, the electromagnetic energy is reflected, absorbed, and dissipated by the shield. The shield material disrupts the receiver\'s circuits, thus preventing interference due to the electromagnetic radiation from reaching the equipment.In order to ensure the best possible attenuation performance, the shield has to be installed correctly. The shield should be installed such that it completely covers the EMI source and is in contact with any electronics it is meant to protect. It should also be grounded to a ground plane. To provide additional protection, the shield can be combined with other measures, such as the incorporation of a Faraday cage, or the installation of additional shielding enclosures.In conclusion, the 24-CBSA-6.0X6.0X0.2 is an example of a single-layer RF Shield, designed to block EMI in the frequency range of 10MHz-3GHz. It is widely used in a variety of applications due to its small size and relatively low material cost. Its working principle is simple – the shield material reflects and absorbs the electromagnetic energy, thus preventing interference. Proper installation of the shield is essential in order to achieve the desired attenuation, and additional protective measures may be employed for added protection.

The specific data is subject to PDF, and the above content is for reference