2450BP15E0100E Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2450BP15E0100E RF Filter is a filter acoustical device designed to reduce the dynamic range of high-frequency sounds produced by mobile phones, radio devices, televisions and other electronic devices. It has a wide frequency range of up to 50MHz and can be used with an amplifier or directly to the input of a receiver or device. The filter is capable of reducing noise in both RF and base band signals and is constructed from a solid-state material with a higher acoustic impedance than any other material that is available for this type of device.

The 2450BP15E0100E filter is composed of several layers consisting of different types of components that are used to reduce unwanted noise and interference. The first layer is the outer shell, which is made of a non-conductive material, such as ‘fiberglass’. This outer shell prevents interference from entering the device. Since the non-conductive material is used, electromagnetic waves don’t pass through it. The second layer is the acoustic material, which consists of acoustic polymers, polyethylene, and polypropylene, and is used to dampen acoustic noise and reduce its wavelength.

The third layer is the RF filter unit, which consists of capacitors, inductors, and resistors. The capacitors and inductors are connected together in a specific configuration and arranged to form a series resonant circuit. This resonant circuit helps to reduce the amplitude of any signals or signals associated with RF noise by blocking them out. The resistors are used to dissipate energy, which prevents the filter from overloading the device.

The fourth layer is the final filtering material, which is composed of ceramic or plastic foam. This material is used to absorb remaining noise and vibration, and to reduce any remaining spurious frequencies. The choice of material used for this layer is typically based on the desired acoustic properties of the filter.

Finally, the fifth layer is a protective shield composed of a conductive material such as copper. This shield prevents RF noise from entering the device. The 2450BP15E0100E filter is designed to reduce the noise by up to 10dB.

To use the 2450BP15E0100E filter, it must first be connected to a power source, such as an amplifier or the circuit board of the device. Then, it must be connected to the antennae or ground line in order to reduce the amount of noise that the device receives. Finally, the capacitor and inductor components of the filter can be adjusted to optimize its performance.

The 2450BP15E0100E RF Filter is an ideal solution for reducing RF noise in many types of applications. It can be used in radio receivers, television receivers, mobile phones, and other electronic devices. Its wide range of frequencies make it suitable for any type of device, and its multiple layers of protection ensure that any noise or interference is attenuated before it can cause any problems.

The specific data is subject to PDF, and the above content is for reference