2450BP15F0100E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Filters: 2450BP15F0100E Application Field and Working Principle

The 2450BP15F0100E is a ceramic bandpass filter offering an exceptionally wide bandwidth suitable for use in tight commercial designs. It is suitable for applications including cellular, global navigation satellite systems (GNSS) and public mobile communication systems. It also offers very high out-of-band rejection and low ripple passbands to ensure that spurious signals do not interfere with the wanted signal.

RF filters are an essential component in any radio frequency communications system. They are used to separate different frequencies in a signal and can filter undesired frequencies from the signal. The 2450BP15F0100E filter is one such filter designed to offer a wide bandwidth for usage in various applications.

The filter consists of two 270-degree notch-articulated traps that are connected in series. It offers a very wide -1dB bandwidth from 990 to 2810 MHz. The minimum insertion loss is 15 dB at the center frequency of 1900 MHz. The maximum insert loss is 17 dB at the center frequency. The maximum passband ripple is 1.0 dB because of its low passband performance.

The 2450BP15F0100E bandpass filter also offers very high out-of-band rejection of 35 dB. This is a result of its high-pass performance, which drastically cuts out any undesired frequencies that could potentially interfere with the signal of interest. Its wide stopband rejection covers frequencies from 40MHz to 990MHz and from 2810MHz to 18GHz.

The 2450BP15F0100E bandpass filter can be used in a variety of radio frequency communications applications, such as cellular, public mobile communication systems, global navigation satellite systems, and industrial instrumentation. It can also be used to reduce interference from unwanted frequencies in a systems where signals are present at multiple frequencies.

The 2450BP15F0100E bandpass filter works by allowing only the desired frequencies to pass through while rejecting other frequencies. This is possible because of the filter’s two 270-degree notch-articulate traps that are connected in series. By setting the exact frequency range that should be allowed and adjusting the notch design of the filter, the exact frequencies needed can be filtered out.

In summary, the 2450BP15F0100E is a ceramic bandpass filter designed for use in a variety of radio frequency communications applications. It offers a very wide -1dB bandwidth and very high out-of-band rejection. Its two 270-degree notch-articulate traps connected in series help provide the precise frequency filtering needed for these applications.

The specific data is subject to PDF, and the above content is for reference