Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit Breakers

Circuit breakers are devices used to restrict the flow of electrical current with the purpose of protecting against overloads and short circuits. The circuit breakers that fall into the 249-6-23869-2 category can handle an exceptionally large amount of current and are used in situations where high amperage is required, such as in substation breakers, switchgear, and large motor control circuits. This type of circuit breaker works on the principle of relatively low voltage and high current, and is designed for use in heavy-duty applications such as utility and industrial power systems.

The core of the circuit breaker consists of two main parts- a movable contact and a stationary contact. When electrical current flows through the circuit breaker, the magnetic field created by the current causes the movable contact to move towards the stationary contact. The amount of current required to cause this movement is set by adjusting the gap between the contacts. When the current reaches the set threshold, the contacts snap closed, which interrupts the electrical connection and prevents any further current from flowing. The contacts then reopen once the current has dropped below the set threshold.

The 249-6-23869-2 circuit breakers are generally used in electrified railway traction systems, network substations, and/or solar power systems. In railway applications, the circuit breakers are used to protect against high current loads caused by frequent short circuits and overloads. In these applications, the circuit breaker is designed to quickly detect the overcurrent and then rapidly open the contacts to reduce the possibility of further damage. This type of circuit breaker also minimizes the chances of an arc flash and the dangers it poses.

In network substations, the circuit breaker is used to control the flow of electricity and to protect against potential hazards caused by high voltage and/or high current. In a solar power system, the circuit breaker is used to protect the system components from excessive current and surges, which could damage or destroy the system. In both cases, the circuit breaker is designed to act as a current-sensitive switch, and to rapidly snap open contacts to prevent problems from occurring.

The 249-6-23869-2 circuit breakers are a reliable and efficient way to restrict the flow of current and are designed for use in high-amperage, heavy-duty applications. These circuit breakers are used in a variety of areas, including railways, substations, and solar power systems, to protect against damage from overloads, short circuits, surges and arcs. This type of circuit breaker is designed to rapidly open the contact switch when the set threshold has been reached, thereby preventing further damage and costly repairs.

The specific data is subject to PDF, and the above content is for reference