24LC32A-I/P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 24LC32A-I/P is a device falling under the Memory category, which is used to store data in a variety of applications. It is often employed in the circuitry of embedded systems, and for the management of processes that require fast access to data.

The product is an EEPROM, or Electrically Erasable Programmable Read-Only Memory, and it operates in a similar way to RAM memory by storing data in memory cells. The chip can be quick-programmed for a large number of applications with a maximum of 32K Bytes in each chip.

The 24LC32A-I/P follows an addressing scheme. This can be a 4- or 8-digit address on the device that allows it to interact with memory devices such as EEPROMs. The chip stores data using an array of memory registers. It is able to store data in large batches while still allowing each register to be accessed and addressed separately.

The 24LC32A-I/P communicates through an I2C protocol, or Inter-Integrated Circuit protocol. This bus solution acts as a convenient and cost-effective way to Interface between systems. The protocol simplifies a number of design elements by enabling a master device to communicate with a slave device. This is done by addressing various hardware registers on the slave device.

The 24LC32A-I/P supports two address modes, the 8-bit address mode and the 10-bit address mode. The 8-bit addressing allows for up to 256 devices to be connected to it. The 10-bit addressing allows for up to 1024 devices to be connected to it. The two modes can increase communication speed, reduce bus loading and also reduce power consumption.

In terms of bus protocol, the 24LC32A-I/P has a max bus speed of up 400kHz. This speed is sufficient for normal operations and allows for quick data transfer. The device supports a stop condition, start condition, acknowledge bytes, and the possibility of interrupting the transmission of a byte.

The 24LC32A-I/P works using a high voltage of 3.3V and low voltage of 1.8V. It is powered by a 5V power supply and has an operating temperature of -40 to +85 degrees Celsius. It involves the sending of signals between devices on a single wire in order to operate. This can be used for control and status information, as well as for data.

The 24LC32A-I/P is an EEPROM device with an array of memory registers that can be accessed and addressed separately. It has a max bus speed of 400kHz, and can be powered by a 5V supply. It supports two different addressing modes for use in a variety of applications. It is suitable for uninterruptible operation, and is usually employed in the circuitry of embedded systems and applications that require quick access to data.

The specific data is subject to PDF, and the above content is for reference