Allicdata Part #: | 24S-CBSA-0.5X1.25X0.2-ND |
Manufacturer Part#: |
24S-CBSA-0.5X1.25X0.2 |
Price: | $ 13.64 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 24S SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 0.500" (12.70mm) X 1.250... |
DataSheet: | 24S-CBSA-0.5X1.25X0.2 Datasheet/PDF |
Quantity: | 1000 |
24 +: | $ 12.38920 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 1.250" (31.75mm) |
Width - Overall: | 0.500" (12.70mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount, Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Shields are a type of device used to protect electronic devices and equipment from electromagnetic interference. They help reduce the amount of interference to other devices, as well as protect the device itself from any unwanted interference. The 24S-CBSA-0.5X1.25X0.2 shield is an example of an RF shield that has a variety of applications and a particular set of working principles.
The 24S-CBSA-0.5X1.25X0.2 shield is primarily designed for analogue radio reception. It provides a powerful effective shielding specificity for narrowband signals in a particular frequency range, including low, mid and high frequencies. The shield is able to block out unwanted interference from other frequencies, allowing only the frequencies that it has been designed for to be accepted. This makes it ideal for radio communications that need to stay clear from all other signals and outside frequencies.
The 24S-CBSA-0.5X1.25X0.2 shield has a variety of applications, especially for low frequency radio communications. It is especially suited to ham radio communications, which allow ham radio operators to communicate with each other over long distances. The shield helps to improve the signal strength of the transmission, and also block out any unwanted interference from other sources. It is also used in military communications, with its effective shielding capabilities making it highly useful in communications in environments where outside interference may be an issue.
The 24S-CBSA-0.5X1.25X0.2 shield has an impressive working principle. It is designed with a multi-layer shield to cover all frequencies, and a conductive material that helps to keep the transmitted signal in and any outside interference out. The outer layer is made of a conductive material and is usually made of copper. The second layer is made from a non-conductive material such as polyester, and is also designed to provide effective shielding. The other two layers are made up of a combination of the two, and should be designed and installed to provide the best shielding for the intended application.
The 24S-CBSA-0.5X1.25X0.2 shield is highly effective in blocking out unwanted interference, while still allowing the transmitted signal to pass through with minimal disruption. This makes it an ideal choice for a variety of applications, and is particularly useful in military and ham radio communications. Its multi-layer design and conductive material make it one of the most effective shields available for narrow band applications, and its effective working principle makes it an invaluable tool in many situations.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...