| Allicdata Part #: | 367-1214-ND |
| Manufacturer Part#: |
25-7035 |
| Price: | $ 0.54 |
| Product Category: | Connectors, Interconnects |
| Manufacturer: | Cinch Connectivity Solutions AIM-Cambridge |
| Short Description: | CONN F PLUG STR 75 OHM |
| More Detail: | F Type Connector Plug, Male Pin 75 Ohm Free Hangin... |
| DataSheet: |  25-7035 Datasheet/PDF |
| Quantity: | 200 |
| Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
| Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
| 1 +: | $ 0.49140 |
| 10 +: | $ 0.43407 |
| 25 +: | $ 0.40824 |
| 50 +: | $ 0.39123 |
| 100 +: | $ 0.37422 |
| 250 +: | $ 0.34020 |
| 500 +: | $ 0.30618 |
| 1000 +: | $ 0.27216 |
| 2500 +: | $ 0.24665 |
| Frequency - Max: | 750MHz |
| Insertion Loss: | -- |
| Mating Cycles: | -- |
| Center Contact Material: | -- |
| Operating Temperature: | -- |
| Dielectric Material: | -- |
| Center Contact Plating: | -- |
| Body Finish: | Nickel |
| Body Material: | Brass |
| Includes: | 2 pcs - 1 Connector, 1 Sleeve |
| Ingress Protection: | -- |
| Housing Color: | Silver |
| Features: | -- |
| Number of Ports: | 1 |
| Series: | -- |
| Fastening Type: | Threaded |
| Cable Group: | RG-59TFE |
| Mounting Feature: | -- |
| Mounting Type: | Free Hanging (In-Line) |
| Impedance: | 75 Ohm |
| Shield Termination: | Crimp |
| Contact Termination: | -- |
| Connector Type: | Plug, Male Pin |
| Connector Style: | F Type |
| Moisture Sensitivity Level (MSL): | -- |
| Part Status: | Active |
| Lead Free Status / RoHS Status: | -- |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Coaxial Connectors (RF)
Coaxial connectors are used in a variety of technologies, from radio transmission to medical imaging and more. In particular, 25-7035 coaxial connectors are widely used, especially in the radio frequency (RF) field. This type of connector is designed to ensure a reliable and consistent connection between two pieces of electrical or electronic equipment.
A 25-7035 coaxial connector is composed of a center pin or probe and an outer metal sleeve known as a shield. The shield is insulated from the pin and connected to the ground but grounded in only one place. The center pin also known as the center conductor is designed to allow electrical or RF signals to pass from one end to another. The tip of the center pin is protected by a plastic insulator or dielectric.
The basic working principle of a 25-7035 coaxial connector is to create an electrical bridge between two conductive components where a direct electrical contact between the two components is not possible. This is usually achieved through the use of metal connectors which are designed to create minimal electrical resistance. By reducing electrical resistance, the signal travelling through the coaxial connector is kept intact and within standard limits.
The most common applications of 25-7035 coaxial connectors are in radio frequency (RF) transmission and in medical imaging. In the RF field, these connectors are used to connect two pieces of equipment such as a radio and a receiver or an antenna. In medical imaging, these connectors are used to transmit electrical signals from a scanner or imaging device to a computer.
The 25-7035 coaxial connectors are an economical and reliable connection between two pieces of equipment, providing good electrical and RF signal transmission. With their superior shielding and stable connection, they are an ideal choice for a wide variety of applications in both the RF and medical imaging fields.
The specific data is subject to PDF, and the above content is for reference
CONN SMB PLUG STR 50OHM CRIMPSMB Connect...
CONN MINI UHF PLUG STR 50 OHMUHF, Mini C...
CONN TNC PLUG R/A 50 OHM CRIMPTNC Connec...
CONN SMB PLUG R/A 50 OHM SOLDERSMB Conne...
CONN N JACK STR 50 OHM CRIMPN Type Conne...
CONN BNC PLUG STR 75 OHM CRIMPBNC Connec...