Allicdata Part #: | 25-CBSA-0.5X5.5X0.225-ND |
Manufacturer Part#: |
25-CBSA-0.5X5.5X0.225 |
Price: | $ 15.85 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 25 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 0.500" (12.70mm) X 5.500... |
DataSheet: | 25-CBSA-0.5X5.5X0.225 Datasheet/PDF |
Quantity: | 1000 |
21 +: | $ 14.40570 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.225" (5.72mm) |
Length - Overall: | 5.500" (139.70mm) |
Width - Overall: | 0.500" (12.70mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount, Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields are a type of electro-mechanical device designed to protect electronic components from RF interference. 25-CBSA-0.5X5.5X0.225 shields are designed specifically to protect circuits from high frequency radio frequency energy. In this article, we will discuss the application field and working principle of 25-CBSA-0.5X5.5X0.225 shields.
The application field of 25-CBSA-0.5X5.5X0.225 shields is mainly in communications equipment and wireless devices. These shields are designed to protect radio frequency circuits from the radio frequency energy generated by radios, cellular phones, and other wireless devices. They can also be used to protect electronic circuits from electro-magnetic interference from external sources, such as power lines. In addition, these shields are also used in medical devices, microwave ovens, automotive electronics, and many other applications.
The working principle of 25-CBSA-0.5X5.5X0.225 shields is based on Faraday\'s law of induction. This law states that an electric field induces a voltage in a conductive material. The shield acts as a Faraday cage, which absorbs incoming RF energy, thereby protecting the components from harm. The frequency of the incoming RF energy determines the thickness and geometry of the shielding material. The shielding material must be able to absorb the frequency of the incoming RF energy without allowing it to be reflected back into the circuit.
The design of 25-CBSA-0.5X5.5X0.225 shields includes a conductive layer which is usually made of metal, such as aluminum, steel, or copper. This material is sandwiched between two other layers of dielectric material which are designed to dissipate static electricity. This sandwich design is then bonded to a heat-resistant, non-corrosive epoxy layer which can withstand temperatures exceeding 250°C. The epoxy layer helps to ensure the integrity of the components that are being protected.
25-CBSA-0.5X5.5X0.225 shields are designed to provide protection against a wide range of radio frequencies, from FM to AM and from UHF to VHF. These shields can also be used to protect circuits from interference caused by other sources, including motors and solenoids. These specialized shields have the added benefit of being able to withstand extreme temperatures, making them suitable for outdoor applications.
In conclusion, 25-CBSA-0.5X5.5X0.225 shields are designed to provide RF protection for a wide range of applications. These shields are designed based on Faraday\'s law of induction and feature a conductive layer, sandwiched between two layers of dielectric material. This design is then bonded to a heat-resistant epoxy layer. These specialized shields are designed to provide protection against a wide range of radio frequencies, from FM to AM and from UHF to VHF, making them suitable for many applications.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...