25-CBSA-0.75X2.0X0.225

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.225" (5.72mm)
Length - Overall:	2.000" (50.80mm)
Width - Overall:	0.750" (19.05mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount, Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RF Shields, or Radio Frequency Shields, are used in a variety of applications to improve the performance of radios and other devices that utilize this technology. 25-CBSA-0.75X2.0X0.225 RF Shields are engineered to provide a highly-effective shielding solution for radio frequencies in the range of 250 MHz to 1 GHz. These RF Shields protect against interference from numerous sources such as cellular phones, broadcasting towers, and other sources of interfering signals. In this article, an overview of the 25-CBSA-0.75X2.0X0.225 application field and working principle is presented.

Application Fields

25-CBSA-0.75X2.0X0.225 RF Shields are designed for applications involving radio frequencies between 250MHz and 1GHz. These shields are commonly used in communication systems, military applications, and consumer electronics, and can be used to reduce or eliminate interference from nearby sources.For communication systems, 25-CBSA-0.75X2.0X0.225 RF Shields can be used to minimize signal interference on radios, antennas, and other communications equipment. This type of shielding is especially important for radios that must operate near large broadcasting towers, as the interference from these sources can significantly reduce their performance.25-CBSA-0.75X2.0X0.225 RF Shields can also be used in military applications to protect sensitive equipment from electromagnetic interference. In addition, these shields are used in consumer electronics products such as cell phones, television sets, and home stereo equipment, to reduce interference from other wireless signals in the vicinity.

Working Principle

25-CBSA-0.75X2.0X0.225 RF Shields are made of conductive materials such as aluminum or copper, which are carefully chosen to provide effective shielding without significantly affecting the performance of the device being protected.These shields work by blocking or reflecting radio frequencies from external sources, while allowing internal frequencies to pass through. To achieve this, the material used must be highly conductive and have a thickness that is appropriate for the frequency being blocked.The effectiveness of the 25-CBSA-0.75X2.0X0.225 RF Shields is further improved by the use of multiple layers of shielding material. These layers are stacked on top of one another and bonded together to create an effective barrier against interference.

Conclusion

In conclusion, 25-CBSA-0.75X2.0X0.225 RF Shields are used in various applications to protect radio equipment from external interference. These shields are designed to minimize signal interference from cellular phones, broadcasting towers, and other sources of interference, and are commonly used in communication systems, military applications, and consumer electronics. They work by blocking or reflecting radio frequencies from outside sources while allowing internal frequencies to pass through. 25-CBSA-0.75X2.0X0.225 RF Shields can be used to improve the performance of radios and other devices by providing a highly-effective shielding solution from interference.

The specific data is subject to PDF, and the above content is for reference