Allicdata Part #: | 25-CBSA-0.75X2.5X0.225-ND |
Manufacturer Part#: |
25-CBSA-0.75X2.5X0.225 |
Price: | $ 12.03 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 25 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 0.750" (19.05mm) X 2.500... |
DataSheet: | 25-CBSA-0.75X2.5X0.225 Datasheet/PDF |
Quantity: | 1000 |
25 +: | $ 10.93510 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.225" (5.72mm) |
Length - Overall: | 2.500" (63.50mm) |
Width - Overall: | 0.750" (19.05mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount, Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Shields are installed around an electronic device which needs to be isolated and protected from external environment to prevent unwanted or damaging electromagnetic interference received from other electronics or transmitting devices of the same type. The 25-CBSA-0.75X2.5X0.225 RF Shield reduces the level of electromagnetic waves that may cause interference to the sensitive internal circuitry of the electronic device.
The RF Shield is designed to reduce the level of electromagnetic interference by using a combination of resistive, dielectric and conductive components. It uses a thick alloy material that is extremely resistant to wear and tear and is also able to effectively and reliably shield both short and long-range electromagnetic energy.
The RF Shield works by redirecting, blocking and absorbing incident electromagnetic energy before it enters the device. The shielding components of the RF Shield are tuned to the specific electromagnetic energy being blocked by the shield. The tuning is done using sophisticated software that determines the optimum geometry for blocking the specific electromagnetic energy. The shield also identifies and filters out harmonics, which are higher frequencies of the same electromagnetic energy.
The RF Shield is also designed to provide a heat sink to the heat-cooled components of the electronic device and dissipate the heat created by the electromagnetic interference, thus keeping the device cooler and allowing it to operate more efficiently. In addition, the RF Shield is designed to reduce noise created by the electromagnetic interference to a minimum.
The 25-CBSA-0.75X2.5X0.225 RF Shield is most commonly used for devices that are used in medical and military applications. It is also used in industrial and telecommunications applications. In addition, the RF Shield can be used to protect electronic equipment from single-event effects (SEE) caused by cosmic rays.
The RF Shield is a versatile and essential addition to any type of device used in electromagnetic environments. It is also capable of being modified to suit specific application requirements. The RF Shield offers protection against electromagnetic interference, thermal effects, single-event effects and other possible destructive phenomena.
The RF Shield can also be used in combination with other components such as filters, amplifiers, transmitters and receivers to ensure ultimate protection against the entire range of electromagnetic interference and environment. All components can be tuned, optimized and customized to meet any specific requirements and application requirements.
By using the 25-CBSA-0.75X2.5X0.225 RF Shield, one can ensure that their electronic device receives optimal protection from unwanted electromagnetic interference. By using the advanced shielding technology, one can also ensure that the device operates efficiently and effectively in the most extreme electromagnetic environments.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...