Allicdata Part #: | 25-CBSA-1.0X4.5X0.225-ND |
Manufacturer Part#: |
25-CBSA-1.0X4.5X0.225 |
Price: | $ 14.21 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 25 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 1.000" (25.40mm) X 4.500... |
DataSheet: | 25-CBSA-1.0X4.5X0.225 Datasheet/PDF |
Quantity: | 1000 |
23 +: | $ 12.91360 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.225" (5.72mm) |
Length - Overall: | 4.500" (114.30mm) |
Width - Overall: | 1.000" (25.40mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount, Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields are common tools used in electronic circuits to provide protection against interference caused by radio frequencies. The 25-CBSA-1.0X4.5X0.225 is a type of RF shield that is used to prevent unwanted radio signal interference in a circuit. This shield is ideal for preventing the radiation and reception of unwanted radio frequencies, allowing for optimal performance of the system.
The most common application for the 25-CBSA-1.0X4.5X0.225 RF shield is in telecommunication systems, as it can effectively reduce noise created by radio frequencies. It can also be used in radar and navigation systems, as well as other systems that are susceptible to interference from radio frequencies. In addition to this, it can also be used in a variety of other systems, such as audio and video equipment, medical imaging systems, and industrial control systems.
The working principle of the 25-CBSA-1.0X4.5X0.225 is relatively simple. The shield works to block out interfering radio signals by creating a physical barrier between the antenna and the equipment being shielded. This barrier is created by a metal shield that is designed to absorb and reflect radiation. The shield is typically made from aluminum, copper, or steel, as these metals are capable of reflecting and absorbing radio waves. However, other materials can also be used depending on the application and desired results.
In addition to providing a physical barrier between the equipment and the antenna, the 25-CBSA-1.0X4.5X0.225 also works to reduce the amount of interference that can pass through the system. This is done by absorbing and reflecting radiation, as well as dissipating energy in the form of heat and energy loss. This helps to ensure that only the desired signals can pass through the system, while any unwanted signals are blocked or attenuated. The amount of attenuation will depend on the size of the shield and its frequency range.
In most cases, the 25-CBSA-1.0X4.5X0.225 is designed to be used in conjunction with other components, such as filters and amplifiers, in order to ensure the highest level of signal interference reduction. For example, a filter can be used to reduce the amount of noise created by radio frequencies, while an amplifier can be used to increase the signal strength. Together, these components can provide the maximum amount of protection from interference and ensure the system is operating at its optimum performance.
Using the 25-CBSA-1.0X4.5X0.225 is relatively simple and can be completed relatively quickly. The most important thing to consider is the size and frequency range of the shield, as this will determine the amount of protection it can offer. Once the size and frequency range have been determined, the shield can be placed near the antenna and connected to the other components in the system. This will ensure maximum protection from unwanted radio frequencies, allowing for optimal performance.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...