Allicdata Part #: | 25-CBSA-1.0X4.75X0.225-ND |
Manufacturer Part#: |
25-CBSA-1.0X4.75X0.225 |
Price: | $ 14.42 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 25 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 1.000" (25.40mm) X 4.750... |
DataSheet: | 25-CBSA-1.0X4.75X0.225 Datasheet/PDF |
Quantity: | 1000 |
23 +: | $ 13.11190 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.225" (5.72mm) |
Length - Overall: | 4.750" (120.65mm) |
Width - Overall: | 1.000" (25.40mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount, Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Shields are conductive covers used to protect radio frequency (RF) signals from interference. The 25-CBSA-1.0X4.75X0.225 is a type of RF shield used in a variety of applications. This article will discuss its applications and working principle.
Application Field
The 25-CBSA-1.0X4.75X0.225 RF shield is usable for any circuits or subsystems that require protection from RF interference. These devices are installed in various RF-sensitive setups, like recording studios, defense-related installations, airspace, and any communication devices using frequencies in the radio spectrum.
In practice, this type of RF shield is used to isolate unwanted transmitters from interfering receivers. It can provide shielding from both emitted and received RF interference, protecting both the transmitter and receiver from the effects of potentially harmful radiation. It is also useful in blocking signal interference between two different types of equipment and instruments, such as audio amplifiers and recording devices.
Working Principle
The 25-CBSA-1.0X4.75X0.225 RF shield consists of a conductive metal layer that is encased in plastic. The metal layer acts as a Faraday cage, absorbing or blocking out incoming RF signals while conducting away the static electricity. This static electricity is then redirected through the anechoic material which acts as a cushioning layer. The anechoic material serves to spread out the energy, reducing the amount of RF radiation that reaches the equipment. This reduces the likelihood of interference between different types of electronic equipment.
The same principle applies when shielding outgoing RF signals. When an RF signal is transmitted from the equipment, the Faraday cage and anechoic material absorb the signal and redirect it, thus preventing it from reaching any unintended receivers. This not only helps to protect the receiver from the potentially damaging effects of RF radiation, it also helps to ensure that the signal is only transmitted to its intended destination.
Conclusion
The 25-CBSA-1.0X4.75X0.225 is a type of RF shield designed to protect both incoming and outgoing RF signals from interference. It is usable for any circuits or subsystems that require protection from RF interference, including recording studios, defense-related installations, airspace, and other communication devices. The shield functions by utilizing a Faraday cage and anechoic material to absorb and redirect RF signals, helping to ensure that the signal is only sent to its intended receiver.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...