Allicdata Part #: | 25-CBSA-1.25X1.75X0.225-ND |
Manufacturer Part#: |
25-CBSA-1.25X1.75X0.225 |
Price: | $ 12.10 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 25 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 1.250" (31.75mm) X 1.750... |
DataSheet: | 25-CBSA-1.25X1.75X0.225 Datasheet/PDF |
Quantity: | 1000 |
27 +: | $ 10.99070 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.225" (5.72mm) |
Length - Overall: | 1.750" (44.45mm) |
Width - Overall: | 1.250" (31.75mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount, Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF shields are essential components in the use of electrical and electronic systems, and they are used to reduce the potential impact of signal interference on component functionality. 25-CBSA-1.25X1.75X0.225 is a type of RF shield widely used in a variety of applications. In this article, the application field and working principle of 25-CBSA-1.25X1.75X0.225 RF shield will be discussed.
The 25-CBSA-1.25X1.75X0.225 RF shield is primarily used to protect electronic components from the EM and RF radiation when they are used in environments such as manufacturing and medical electronics. The shield is designed for use in high-frequency (HF) and low-frequency (LF) applications, and it is most often used with components that operate in the 200MHz to 500MHz range. The 25-CBSA-1.25X1.75X0.225 RF shield is also used for a variety of home and commercial applications, including WiFi systems, antennas, cable connections, and wireless communication devices.
The 25-CBSA-1.25X1.75X0.225 RF shield consists of a metal body that has been designed to absorb and reflect EM and RF radiation. The metal body of the RF shield is made up of layers of material that provide protection from radiation in all directions. The shield is divided into two parts; the outer part consists of the metal body and the inner part is made up of a soft material. The soft material is designed to absorb unwanted RF signals. This material absorbs the energy of the incoming radiation and deflects it back out into the environment, thus reducing the potential for interference to components inside the shield.
The 25-CBSA-1.25X1.75X0.225 RF shield works by preventing the transmission of unwanted EM or RF radiation to the components inside the shield. The metal body of the shield is designed to absorb the radiation, while the soft material inside the shield will absorb any additional radiation that is present. In addition, the metal body of the RF shield acts as a reflector, which reflects radiation away from the components inside the shield and also reduces the potential for interference. The metal body of the RF shield is also designed to deflect incoming radiation away from the components, thereby further reducing the potential for signal interference.
In conclusion, the 25-CBSA-1.25X1.75X0.225 RF shield is an essential component in the protection of electronic components from EM or RF radiation. It is designed to reduce the potential for signal interference and to deflect incoming radiation away from the components inside the shield. The shield is widely used in a variety of applications, including manufacturing, medical electronics, home and commercial applications, and wirelessly connected devices. By using the 25-CBSA-1.25X1.75X0.225 RF shield, electronic components can be better protected from the potential hazards of EM and RF radiation.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...