25-CBSA-1.25X3.0X0.225

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.225" (5.72mm)
Length - Overall:	3.000" (76.20mm)
Width - Overall:	1.250" (31.75mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount, Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RF shields, also known as radio frequency shields, are products designed to prevent electromagnetic interference (EMI) from travelling between two electronic components or systems. EMI can interfere with the performance of electronic devices such as military and communication systems, or even consumer electronics. One example of an RF shield is the 25-CBSA-1.25X3.0X0.225, which is a ferrites shield designed to protect and minimize radio frequency through-air-EMI/RFI noise. In this article, we will discuss the application field and working principles of the 25-CBSA-1.25X3.0X0.225.

Application Field and Working Principle of 25-CBSA-1.25X3.0X0.225

The 25-CBSA-1.25X3.0X0.225 is a RF shield designed for plug-in or press-fit applications and is used primarily for applications in RF and EM noise reduction applications. The product is used in a variety of applications, including automotive, telecommunications, consumer electronics, military/aerospace, and medical.The 25-CBSA-1.25X3.0X0.225 utilizes ferrite shielding bars that are designed to reduce EMI/RFI noise. Ferrite shields are made up of ceramic-based material that absorbs high-frequency signals and reflects them or dissipates them as heat. The shield material is very magnetic and helps to reduce the path of noise transmission, thus avoiding EMI/RFI noise.The 25-CBSA-1.25X3.0X0.225 has three parts: shield bar, guard bar and ground bar. The shield bar is made of high permeability ferrite material and is the main part of the shield. It is designed to absorb high frequency EMI and RF signals preventing them from propagating through the system. The guard bar provides additional protection and works as an attachment point between the shield bar and ground bar. The ground bar is a low impedance connection or shunt that channels the EMF away from the shield.

Conclusion

The 25-CBSA-1.25X3.0X0.225 is a ferrites shield designed for plug-in or press-fit applications and is used primarily for applications in RF and EM noise reduction applications. The shield is made up of three parts: shield bar, guard bar and ground bar, and is designed to reduce EMI/RFI noise by absorbing high-frequency signals and reflecting them or dissipating them as heat. The 25-CBSA-1.25X3.0X0.225 is used in applications such as automotive, telecommunications, consumer electronics, military/aerospace, and medical. It is an important product for helping to minimize radio frequency through-air-EMI/RFI noise and is widely used for its exceptional noise-reducing properties.

The specific data is subject to PDF, and the above content is for reference