25-CBSA-2.5X3.25X0.225

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF shields are designed to protect electronic components from the effects of electromagnetic interference (EMI) that can be caused by radiation from radio wave sources. The 25-CBSA-2.5X3.25X0.225 is a type of RF shield that helps to protect electronic components by acting as a barrier between them and the sources of radiation. This shield helps to reduce the amount of undesirable EMI that is produced by the radio wave sources.

This type of RF shield consists of a metallic material, usually copper or aluminum, that acts as a barrier between the EMI originating from the radio sources and the electronic components. The material is cut to specific dimensions to form a protective shield around the equipment. This shield helps to minimize the amounts of assumed EMI that can enter the equipment and cause problems. By reducing the amount of EMI, the risk of damage to the components is reduced.

The 25-CBSA-2.5X3.25X0.225 RF shield is specially designed to protect sensitive electronic components from radiation. It is cut from a sheet of metallic material and formed into a box-like shape. The box is tightly sealed with solder or other electrically conductive material. This helps to further reduce the amount of EMI that can enter the equipment. This shield is most commonly used to protect small electronic components such as integrated circuits, oscillators, and transceiver circuits.

One of the advantages of the 25-CBSA-2.5X3.25X0.225 RF shield is that it provides reliable protection without significantly impacting the performance of the protected components. In addition, this type of shield is easy to install and relatively inexpensive. The shield also does not require any special maintenance to remain effective.

Although the 25-CBSA-2.5X3.25X0.225 RF shield is designed primarily to protect electronic components from EMI, it can also be used to reduce the amount of radio frequency (RF) energy that can be received by the equipment. This is accomplished by reducing the amount of radiation that is emitted by the shielding material. The shielded box also helps to reduce the level of ambient noise that can be present in the environment where the equipment is located.

In addition to protecting electronic components from EMI, the 25-CBSA-2.5X3.25X0.225 RF shield can also be used to protect equipment from lightening strikes. Since the shield is connected to a grounding system, it helps divert the electrical power away from the equipment and into the ground. This helps reduce the risk of damage to the equipment.

The 25-CBSA-2.5X3.25X0.225 RF shield is an effective way to protect sensitive electronic components from EMI and RF energy. It is easy to install and relatively inexpensive, making it a great choice for those looking for an effective shielding solution. Its shielding properties also make it a great choice for protecting equipment from lightening strikes. The 25-CBSA-2.5X3.25X0.225 RF shield is an ideal choice for those looking for an effective shielding solution for their equipment.

The specific data is subject to PDF, and the above content is for reference