25-CBSA-2.5X3.75X0.225

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.225" (5.72mm)
Length - Overall:	3.750" (95.25mm)
Width - Overall:	2.500" (63.50mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount, Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields are commonly used in electromagnetic shielding applications, particularly those involving radio frequencies (RF). They serve a variety of purposes, including protecting sensitive electronic components from the damaging effects of electromagnetic interference. The 25-CBSA-2.5X3.75X0.225 is a typical type of RF Shield designed for use in industrial and commercial systems.The 25-CBSA-2.5X3.75X0.225 is a two-part shield assembly, comprising a ferrite and a metallic shield. The ferrite component is a ceramic material, typically made from iron oxide, barium, and strontium. The composition of the ferrite component is designed to provide optimal efficiency in terms of both attenuation and frequency range, while the metallic component serves to increase the effectiveness of the overall assembly.When an RF Shield is activated, it works by absorbing a portion of the incoming electromagnetic radiation. The absorption is achieved through the creation of an attenuation field, created by the ferrite material, within which the electrons in the incoming signal find it difficult to move. This action results in a reduction of the amplitude of the signal, thereby providing a measure of protection for the electronic equipment.The 25-CBSA-2.5X3.75X0.225 is typically used in applications where a high degree of shielding is required. Examples include industrial control systems, medical equipment, scientific instruments, and telecommunications equipment. The 25-CBSA-2.5X3.75X0.225 is designed to provide up to 99.999% of shielding effectiveness, making it well suited for a wide range of applications.In addition to providing a high degree of shielding, the 25-CBSA-2.5X3.75X0.225 can also be used to reduce the amount of energy radiated by RF-emitting components. This is achieved by the ferrite component, which can absorb and dissipate a portion of the energy of the emitted waves. This means that not only is the amount of energy the component emits reduced, but it also reduces the amount of interference it causes in the surrounding environment.The 25-CBSA-2.5X3.75X0.225 is an effective, yet simple solution for providing a high degree of shielding in a wide range of applications. Its ability to absorb and dissipate energy, coupled with its ease of installation, make it an ideal choice for many applications in which RF shielding is required.

The specific data is subject to PDF, and the above content is for reference