Allicdata Part #: | 25-CBSFN-2.25X3.50X0.375-ND |
Manufacturer Part#: |
25-CBSFN-2.25X3.50X0.375 |
Price: | $ 20.05 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 25-CBSFN-2.25X3.50X0.375--25S68- |
More Detail: | RF Shield Shield, 2-Piece 2.250" (57.15mm) X 3.500... |
DataSheet: | 25-CBSFN-2.25X3.50X0.375 Datasheet/PDF |
Quantity: | 1000 |
20 +: | $ 18.22840 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.375" (9.53mm) |
Length - Overall: | 3.500" (88.90mm) |
Width - Overall: | 2.250" (57.15mm) |
Ventilation: | Vent Holes in Pattern |
Mounting Type: | Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Shields is a type of protective shielding device. It is a metal device that is designed to protect electronic circuits from electromagnetic interference (EMI) and radio frequency interference (RFI). There are various types of RF Shields available on the market, and the 25-CBSFN-2.25X3.50X0.375 is one of the most commonly used types. It is typically used in telecommunication systems, radio transmission equipment, industrial automation systems, and medical equipment.
The main purpose of RF Shields is to block unwanted RF signals from entering or exiting an electronic system. When used in electronics, RF Shields prevent the transmission of electromagnetic waves between electronics components. RF Shields are also used to protect sensitive electrical components from damage caused by nearby RF radiation. In addition, they can also be used to reduce cross-talk interference between multiple electronic components.
The 25-CBSFN-2.25X3.50X0.375 is a type of RF Shield which is designed for high frequency applications. It is designed to provide excellent shielding performance in the range of 2.25 to 3.50GHz with an attenuation of more than 50 decibel. It is constructed primarily from a perforated zinc coated steel, which is then covered with a conductive copper layer. The steel used in this type of RF Shield is typically cold rolled steel or galvanized steel.
The 25-CBSFN-2.25X3.50X0.375 is designed to limit EMI and RFI emissions from electronic components such as transceivers, transmitters and receivers. It can be used in a variety of applications such as mobile phones, Wi-Fi networks, satellite communications, radar systems and cellular networks. When used in these applications, it helps to reduce interference from external sources and provides an improved signal quality.
The working principle of 25-CBSFN-2.25X3.50X0.375 is based on the fact that radio waves can be reflected and absorbed. When the device is placed between the emitting source and the receiving source, it reflects the radiated waves so that they are not able to reach the receiver. It also absorbs the energy of the RF waves and dissipates it in the form of heat. This ensures that the amount of electromagnetic energy travelling in the surrounding areas is significantly reduced.
The 25-CBSFN-2.25X3.50X0.375 offers excellent shielding performance and is particularly suitable for applications where high frequency signals may be present. It is also suitable for use in extreme temperatures, high humidity, and where radiation levels are high. In addition, it is easy to install and provides cost effective protection for sensitive electronic components.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...