2500LP14B0400T

Series:	--
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Moisture Sensitivity Level (MSL):	--
Frequency:	2.5GHz Center
Bandwidth:	400MHz
Filter Type:	Low Pass
Ripple:	--
Insertion Loss:	0.62dB
Mounting Type:	Surface Mount
Package / Case:	0603 (1608 Metric), 6 PC Pad
Size / Dimension:	0.063" L x 0.032" W (1.60mm x 0.80mm)
Height (Max):	0.028" (0.70mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Filters: 2500LP14B0400T Application Field and Working Principle

RF filters are utility components designed to filter out specific frequencies or deeps from radio signals. They are widely used in various applications, from consumer electronics to military communications, and are part of every electronic system. The 2500LP14B0400T is a low profile RF filter which is designed to pass signals up to a certain frequency, and to reject signals beyond that frequency. This article will discuss the applications of the 2500LP14B0400T, as well as its underlying working principle. The 2500LP14B0400T is designed for a wide variety of applications, most notably cellular and wireless communications. It is ideal for radio frequency engineering tasks and is often used as a matching filter to reduce noise and reception problems. It is also ideal for base station equipment, as it helps minimize interference from outside sources. Additionally, its low profile design makes it suitable for both commercial and military applications. The 2500LP14B0400T is a bandpass filter designed to pass only a specific band of frequencies, while rejecting all other frequencies. It is constructed using a combination of inductive and capacitive coupling components surrounded by a metal case or shield. The inductors, which are usually made of coils of wire, allow current to pass through and are designed to accommodate a precise frequency range. The capacitors act as the ‘semi-permeable membrane’ of the filter, allowing only certain frequencies to pass through while rejecting all other frequencies. The 2500LP14B0400T is generally used in combination with other RF filters or components to more accurately filter signals. When two filters are combined, the output signal is greater than that of a single filter. As the two filters work together, the overall frequency response is further improved, allowing signals to be filtered more accurately. It is important to note that the 2500LP14B0400T is only designed to operate in the transmit/receive mode, and not for digital modulation. Additionally, it is tuned for a specific set of frequencies. To accommodate changes in frequency, the device must be re-tuned in order to ensure its continued operation. Overall, the 2500LP14B0400T is an ideal choice for cellular and wireless communications applications. Its low profile design and wide range of frequency range make it highly effective for filtering out unwanted interference. Additionally, its combination of inductive and capacitive coupling components makes it highly effective at allowing only desired signals to pass and rejecting all other signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description