2510-50H

DC Resistance (DCR):	3.3 Ohm Max
Height - Seated (Max):	0.110" (2.79mm)
Size / Dimension:	0.245" L x 0.095" W (6.22mm x 2.41mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	2.5MHz
Operating Temperature:	-55°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	29MHz
Q @ Freq:	25 @ 2.5MHz
Series:	2510
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	120mA
Tolerance:	±3%
Inductance:	12µH
Material - Core:	Iron
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductor 2510-50H Application Field And Working PrincipleFixed inductors, also known as inductor cores, are passive electrical component elements which usually consist of a coil of wire wrapped around a core material. They are used to create a magnetic field which is then used to induce electrical current in a circuit. The 2510-50H is a common type of inductor used in a wide variety of different applications. This article will discuss the application field and working principle of the 2510-50H fixed inductor.The 2510-50H has a host of different uses across a variety of industries and applications. This type of inductor is used in electronic circuits to store electrical energy, regulate current flow and signal frequencies, as well as filter out electrical noise. It is also used in electric motors, solenoids, transformers, and other devices with similar components.In a fixed inductor, such as the 2510-50H, electrical current is sent through a coil of wire, which is wrapped around a core material such as an iron powder, ferrite, or other magnetic materials. This creates a magnetic field which then induces an electrical current in the coil. The amount of current induced depends on the electrical resistance in the coils. The higher the resistance, the more current that is induced.The 2510-50H is typically used in medium- and low-frequency applications where high levels of current are needed. However, it can also be used in high-frequency applications where the frequency is below 20 MHz. Because the 2510-50H is a fixed inductor, it does not require any adjustment or tuning to work properly. This makes it a very reliable and low-maintenance component for most applications.In addition to its use in electrical circuits, the 2510-50H can also be used in audio applications such as amplifiers and receivers. In these applications, the inductor acts as an impedance matching component to improve the audio quality of the device. In some cases, the inductor can also be used to filter out unwanted high and low frequency signals to reduce the amount of noise generated by the device.The 2510-50H is a very versatile type of fixed inductor that can be used in a variety of different applications. In addition to its use in electrical circuits, it can also be used in audio applications for improved sound quality. The 2510-50H is a reliable component as it does not require any tuning or adjustments to work properly. This makes the 2510-50H a cost-effective and low maintenance solution for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description