2540104

Fuseholders are necessary components in electrical installations as they help to protect the wiring from various electrical faults. They also provide an electrical connection point for attaching different components. 2540104 fuseholders are designed to meet the requirements for UL and CSA fuse holders in the US and Canada. The 2540104 fuseholder is a single-piece construction and designed for screw-type mounting. It is also possible to attach the fuseholder to the panel via a panel-mounting kit.

The 2540104 fuseholder is rated for use with either 0.250 inch (6.35 mm) x 0.372 inch (9.45 mm) JKL style fuses or 0.305 inch (7.75 mm) x 0.375 inch (9.53 mm) SBD style fuse. The body of the fuseholder is constructed of UL94V-0 rated thermoplastic and the retained parts are made up of nickel plated copper. It has a 20 Amp rating and is designed to have a response time of less than 10 seconds.

The 2540104 fuseholder has a working principle which is based on the ability to open a circuit quickly when a certain amount of current is exceeded. It is designed to detect a fault in the electrical circuit and to make a safe disconnection to prevent damage or injury from occurring. The fuseholder is also designed to detect and hold the fault for a period of time, allowing for a safe disconnection.

The fuseholder has a two-part assembly, consisting of an actual holder and a receptacle. The holder is the upper part which houses the fuse itself, and the receptacle is the lower part which attaches to the corresponding panel. The holder has a spade-type terminal which provides an electrical connection to the panel, while the receptacle provides the mechanical attachment and allows for the positively locating the fuse. The fuseholder is designed to allow for the replacement of the fuse without having to disconnect the fuseholder from the panel or the wiring.

The 2540104 fuseholder is ideally suited for use in a variety of applications such as commercial, residential and industrial, and can be used with a variety of different fuses depending on the application. It is UL and CSA certified, and also meets the UL and CSA standards for over-current protection and environmental protection. The fuseholder is designed for use with various types of fuse blocks and is suitable for use in dry locations.

2540104 fuseholders provide safe and efficient protection from over-current protection faults in many different types of electrical installations. They provide a reliable and cost effective solution for connecting fuse blocks and for providing over-current protection. The fuseholders are also suitable for a wide range of applications and provide a fast and reliable way to connect fuses.