262103

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

Coaxial connectors (RF) are a type of electronic connector, sometimes referred to as radio frequency (RF) connectors. They are typically used for low-signal, radio-frequency applications, such as connecting two-way radios, cell phones, television receivers, satellite dishes, and other similar devices.

262103 Application Field and Working Principle

The 262103 application field involves connecting RF devices such as two-way radios, cellular phones, television receivers, satellite dishes, digital cable boxes, and other related devices. It is used for low-signal applications that require good signal performance in order to deliver reliable results. The 262103 works by using a threaded connection to couple the male and female sides of the connector together, creating a secured seal. The male side of the connector uses a threaded connection, while the female side of the connector uses a compression connection.

The 262103 uses a center conductive pin surrounded by a conductive sleeve. The center conductive pin provides a larger contact area for the electrical connection, while the conductive sleeve is used to protect the center pin from mechanical damage and acts as an additional ground connection. This type of connector is typically designed with an insulation sleeve that prevents electrical current from jumping between the pins and the sleeve. This ensures a safe electrical connection and prevents any dangerous short-circuits.

The 262103 connector is structurally robust and designed with features, such as strain relief, to protect against environmental stresses and vibration. It also utilizes RF shielding which prevents external RF interference from affecting the signal transmission. This shielding helps to ensure that only the desired transmission is received, while any potential interference is blocked.

The 262103 is a popular connector choice due to its low insertion loss, lightweight design, secure connection, and shielding capabilities. It is also designed to meet the “Typical Average Power” ratings found on many radio systems. This type of connector is typically used in low-frequency applications, requiring good signal performance and reliable results.

The specific data is subject to PDF, and the above content is for reference